v4.0/src/H/BASEMID.H

   1 /*      SCCSID = @(#)basemid.h  8.26 87/05/21 */
   2
   3 #define MSG_RESPONSE_DATA               0         /* data for valid responses (Y N A R I) */
   4 #define MSG_INVALID_FUNCTION            1         /* Invalid function */
   5 #define MSG_FILE_NOT_FOUND              2         /* File not found */
   6 #define MSG_PATH_NOT_FOUND              3         /* Path not found */
   7 #define MSG_OUT_OF_HANDLES              4         /* Too many open files, no handles left */
   8 #define MSG_ACCESS_DENIED               5         /* Access denied */
   9 #define MSG_INVALID_HANDLE              6         /* Invalid handle */
  10 #define MSG_MEMORY_BLOCKS_BAD           7         /* Memory control blocks destroyed */
  11 #define MSG_NO_MEMORY                   8         /* Insufficient memory */
  12 #define MSG_INVALID_MEM_ADDR            9         /* Invalid memory block address */
  13 #define MSG_INVALID_ENVIRON             10        /* Invalid environment */
  14 #define MSG_INVALID_FORMAT              11        /* Invalid format */
  15 #define MSG_INVALID_ACC_CODE            12        /* Invalid access code */
  16 #define MSG_INVALID_DATA                13        /* Invalid data */
  17 #define MSG_14                          14        /* Reserved */
  18 #define MSG_INVALID_DRIVE               15        /* Invalid drive */
  19 #define MSG_ATT_RD_CURDIR               16        /* Attempt to remove current directory */
  20 #define MSG_NOT_SAME_DEVICE             17        /* Not same device */
  21 #define MSG_NO_MORE_FILES               18        /* No more files */
  22 #define MSG_ATT_WRITE_PROT              19        /* Attempted write on protected disk */
  23 #define MSG_UNKNOWN_UNIT                20        /* Unknown unit */
  24 #define MSG_DRIVE_NOT_READY             21        /* Drive not ready */
  25 #define MSG_UNKNOWN_COMMAND             22        /* Unknown command */
  26 #define MSG_DATA_ERROR                  23        /* Data error (CRC) */
  27 #define MSG_BAD_REQ_STRUCTURE           24        /* Bad request structure length */
  28 #define MSG_SEEK_ERROR                  25        /* Seek error */
  29 #define MSG_UNKNOWN_MEDIA               26        /* Unknown media type */
  30 #define MSG_SECTOR_NOT_FOUND            27        /* Sector not found */
  31 #define MSG_OUT_OF_PAPER                28        /* Printer out of paper */
  32 #define MSG_WRITE_FAULT                 29        /* Write fault */
  33 #define MSG_READ_FAULT                  30        /* Read fault */
  34 #define MSG_GENERAL_FAILURE             31        /* General failure */
  35 #define MSG_SHARING_VIOLATION           32        /* Sharing violation */
  36 #define MSG_SHAR_VIOLAT_FIND            32        /* sharing violation find */
  37 #define MSG_LOCK_VIOLATION              33        /* Lock violation */
  38 #define MSG_INVALID_DISK_CHANGE         34        /* Invalid disk change */
  39 #define MSG_35                          35        /* FCB unavailable */
  40 #define MSG_SHARING_BUFF_OFLOW          36        /* Sharing buffer overflow */
  41 /* msg 37 - 49 reserved */
  42 #define MSG_NET_REQ_NOT_SUPPORT         50        /* net request not supported */
  43 #define MSG_NET_REMOTE_NOT_ONLINE       51        /* remote computer not online */
  44 #define MSG_NET_DUP_FILENAME            52        /* duplicate filename on network */
  45 #define MSG_NET_PATH_NOT_FOUND          53        /* network path not found */
  46 #define MSG_NET_BUSY                    54        /* network is busy */
  47 #define MSG_NET_DEV_NOT_INSTALLED       55        /* device no longer installed */
  48 #define MSG_NET_BIOS_LIMIT_REACHED      56        /* BIOS command limit exceeded */
  49 #define MSG_NET_ADAPT_HRDW_ERROR        57        /* adapter hardware error */
  50 #define MSG_NET_INCORRECT_RESPONSE      58        /* network response incorrect */
  51 #define MSG_NET_UNEXPECT_ERROR          59        /* unexpected network error */
  52 #define MSG_NET_REMOT_ADPT_INCOMP       60        /* remote adapter is incompatible */
  53 #define MSG_NET_PRINT_Q_FULL            61        /* print queue is full */
  54 #define MSG_NET_NO_SPACE_TO_PRINT_FL    62        /* not enough space to print file */
  55 #define MSG_NET_PRINT_FILE_DELETED      63        /* print file was deleted */
  56 #define MSG_NET_NAME_DELETED            64        /* network name was deleted */
  57 #define MSG_NET_ACCESS_DENIED           65        /* network access denied */
  58 #define MSG_NET_DEV_TYPE_INVALID        66        /* network device type invalid */
  59 #define MSG_NET_NAME_NOT_FOUND          67        /* network name cannot be found */
  60 #define MSG_NET_NAME_LIMIT_EXCEED       68        /* net name limit was exceeded */
  61 #define MSG_NET_BIOS_LIMIT_EXCEED       69        /* BIOS session limit exceeded */
  62 #define MSG_NET_TEMP_PAUSED             70        /* net is temporarily paused */
  63 #define MSG_NET_REQUEST_DENIED          71        /* net request was denied */
  64 #define MSG_NET_PRT_DSK_REDIR_PAUSE     72        /* print or disk redirection paused */
  65 /* msg 73 - 79 reserved */
  66 #define MSG_FILE_EXISTS                 80
  67 /* msg 81 reserved */
  68 #define MSG_CANNOT_MAKE                 82
  69 #define MSG_NET_FAIL_INT_TWO_FOUR       83        /* fail on int 24 */
  70 #define MSG_NET_TOO_MANY_REDIRECT       84        /* too many net redirections */
  71 #define MSG_NET_DUP_REDIRECTION         85        /* duplicate redirection */
  72 #define MSG_NET_INVALID_PASSWORD        86        /* invalid password */
  73 #define MSG_NET_INCORR_PARAMETER        87        /* incorrect net parameter */
  74 #define MSG_NET_DATA_FAULT              88        /* net data fault */
  75 #define MSG_NO_PROC_SLOTS               89        /* no process slots */
  76 #define MSG_DISK_CHANGE                 107
  77 #define MSG_DRIVE_LOCKED                108
  78 #define MSG_ERROR_OPEN_FAILED           110       /* error open failed */
  79 #define MSG_DISK_FULL                   112
  80 #define MSG_NO_SEARCH_HANDLES           113
  81 #define MSG_ERR_INV_TAR_HANDLE          114       /* error invalid target handle */
  82 #define MSG_BAD_DRIVER_LEVEL            119       /* bad driver level */
  83 #define MSG_INVALID_NAME                123
  84 #define MSG_NO_VOLUME_LABEL             125
  85 /* */
  86 #define MSG_JOIN_ON_DRIV_IS_TAR         133       /* directory on drive is target of a jo */
  87 #define MSG_JOIN_DRIVE_IS               134       /* drive is joined */
  88 #define MSG_SUB_DRIVE_IS                135       /* drive is substed */
  89 #define MSG_DRIVE_IS_NOT_JOINED         136       /* drive is not joined */
  90 #define MSG_DRIVE_NOT_SUBSTED           137       /* drive is not substituted - subst */
  91 #define MSG_JOIN_CANNOT_JOIN_DRIVE      138       /* cannot join to a joined drive */
  92 #define MSG_SUB_CANNOT_SUBST_DRIVE      139       /* cannot sub to sub drive */
  93 #define MSG_JOIN_CANNOT_SUB_DRIVE       140       /* cannot join to a substed drive */
  94 #define MSG_SUB_CANNOT_JOIN_DRIVE       141       /* cannot sub to a joined drive */
  95 #define MSG_DRIVE_IS_BUSY               142       /* drive is busy - join */
  96 #define MSG_JOIN_SUB_SAME_DRIVE         143       /* cannot join or subst a drive to dir */
  97 #define MSG_DIRECT_IS_NOT_SUBDIR        144       /* directory is not subdirectory of root */
  98 #define MSG_DIRECT_IS_NOT_EMPTY         145       /* directory is not empty  -join */
  99 #define MSG_PATH_USED_SUBST_JOIN        146       /* path used in subst, join - join sub */
 100 /*  147 not used */
 101 #define MSG_PATH_BUSY                   148       /* path is busy - join */
 102 #define MSG_SUB_ON_DRIVE_IS_JOIN        149       /* directory on drive is target of a st */
 103 /* */
 104 #define MSG_VOLUME_TOO_LONG             154
 105 /* */
 106 #define MSG_INVALID_ORDINAL             182       /* invalid ordinal */
 107 #define MSG_INVALID_STARTING_CODESEG    188       /* invalid code seg */
 108 /* */
 109 #define MSG_INVALID_STACKSEG            189       /* invalid stack segment */
 110 #define MSG_INVALID_MODULETYPE          190       /* invalid module type */
 111 #define MSG_INVALID_EXE_SIGNATURE       191       /* Invalid signature */
 112 #define MSG_EXE_MARKED_INVALID          192       /* Invalid exec file */
 113 #define MSG_BAD_EXE_FORMAT              193       /* Bad or old exec file */
 114 #define MSG_ITERATED_DATA_EXCEEDS_64K   194       /* iterated data exceeds 64k */
 115 #define MSG_INVALID_MINALLOCSIZE        195       /* data segment has invalid size */
 116 #define MSG_DYNLINK_FROM_INVALID_RING   196       /* invalid ring */
 117 #define MSG_IOPL_NOT_ENABLED            197       /* IOPL not enabled */
 118 #define MSG_INVALID_SEGDPL              198       /* Invalid privilege level */
 119 #define MSG_AUTODATASEG_EXCEEDS_64K     199       /* Privilege level exceeds 64K */
 120 /*  200 not used */
 121 #define MSG_RELOC_CHAIN_XEEDS_SEGMENT   201       /* Ring must be movable */
 122 #define MSG_INFLOOP_IN_RELOC_CHAIN      202       /* infinite loop */
 123 #define MSG_ENVVAR_NOT_FOUND            203       /* environment variable not found */
 124 #define MSG_SIGNAL_NOT_SENT             205       /* DOS signal not sent */
 125 /* */
 126 #define MSG_MR_CANT_FORMAT              317
 127 #define MSG_MR_NOT_FOUND                318
 128 #define MSG_MR_READ_ERROR               319
 129 #define MSG_MR_IVCOUNT_ERROR            320       /*IvCount out of range */
 130 #define MSG_MR_UN_PERFORM               321
 131 /* */
 132 #define MSG_DIS_ERROR                   355
 133 #define MSG_NO_COUNTRY_SYS              396
 134 #define MSG_OPEN_COUNTRY_SYS            397
 135 #define MSG_COUNTRY_NO_TYPE             401
 136 /* 900 - 999 reserved for IBM Far East */
 137 /* 1000 not used */
 138 #define MSG_BAD_PARM1                   1001      /* invalid parm */
 139 #define MSG_BAD_PARM2                   1002      /* invalid parm with specified input */
 140 #define MSG_BAD_SYNTAX                  1003      /* invalid syntax */
 141 /* 1004 not used */
 142 #define MSG_SWAP_INVALID_DRIVE          1470      /* Invalid drive %1 specified SWAPPATH */
 143 #define MSG_SWAP_INVALID_PATH           1471      /* Invalid path %1 specified in SWAPPATH */
 144 #define MSG_SWAP_CANNOT_CREATE          1472      /* Cannot create swap file %1 */
 145 #define MSG_SWAP_DISABLED               1473      /* Segment swapping is disabled */
 146 #define MSG_SWAP_CANT_INIT              1474      /* Cannot initialize swapper */
 147 #define MSG_SWAP_NOT_READY              1500      /* diskette containing swap file not rdy */
 148 #define MSG_SWAP_WRITE_PROTECT          1501      /* Diskette containing swap file wrpro */
 149 #define MSG_SWAP_IN_ERROR               1502      /* I/O error on swap file */
 150 #define MSG_SWAP_IO_ERROR               1502      /* I/O error on swap file */
 151 #define MSG_SWAP_FILE_FULL              1503      /* Swap file is full */
 152 #define MSG_SWAP_TABLE_FULL             1504      /* Swap control table full */
 153 /* */
 154 #define MSG_SYSINIT_INVAL_CMD           1195      /* Unrecognized command */
 155 #define MSG_SYSINIT_INVAL_PARM          1196      /* Invalid parameter */
 156 #define MSG_SYSINIT_MISSING_PARM        1197      /* Missing parameter */
 157 /* 1198 - 1199 not used */
 158 #define MSG_SYSINIT_DOS_FAIL            1200      /* Cannot create DOS mode */
 159 /* 1201 - 1204 not used */
 160 #define MSG_SYSINIT_DOS_MODIFIED        1205      /* DOS mode memory modified by DD */
 161 #define MSG_SYSINIT_UFILE_NO_MEM        1206      /* Out of memory loading user program or DD */
 162 /* 1207 not used */
 163 #define MSG_SAD_INSERT_DUMP             1395      /* insert dump disk - rasmsg */
 164 /* 1517 not used */
 165 #define MSG_SYSINIT_SFILE_NOT_FND       1518      /* System file not found */
 166 #define MSG_SYSINIT_SFILE_NO_MEM        1519      /* Out of memory loading system program or DD */
 167 /* 1520 not used */
 168 #define MSG_SYSINIT_TOO_MANY_PARMS      1521      /* Too many parms on line */
 169 /* 1522 not used */
 170 #define MSG_SYSINIT_MISSING_SYMB        1523      /* No equal or space */
 171 /* 1708 - 1717 not used */
 172 #define MSG_SYSINIT_UFILE_NOT_FND       1718      /* User file not found */
 173 #define MSG_SYSINIT_UDRVR_INVAL         1719      /* User device driver invalid */
 174 /* 1720 not used */
 175 #define MSG_SYSINIT_BANNER              1721      /* Version banner message */
 176 #define MSG_SYSINIT_CANT_LOAD_MOD       1722      /* Can't load module */
 177 #define MSG_SYSINIT_EPT_MISSING         1723      /* Entry point missing */
 178 #define MSG_SYSINIT_CANT_OPEN_CON       1724      /* Can't open con */
 179 #define MSG_SYSINIT_WRONG_HANDLE        1725      /* wrong handle for standard input file */
 180 #define MSG_SYSINIT_PRESS_ENTER         1726      /* Press enter to continue */
 181 #define MSG_SYSINIT_CANT_GET_CACHE      1727      /* Can't allocate cache memory */
 182 /* 1728 not used */
 183 #define MSG_SYSINIT_VIO_CP              1729      /* VioSetCp failed */
 184 #define MSG_SYSINIT_KBD_CP              1730      /* KbdSetCp failed */
 185 /* 1731 - 1732 not used */
 186 #define MSG_SYSINIT_SCFILE_INVAL        1733      /* System country file is bad */
 187 /* 1734 not used */
 188 #define MSG_SYSINIT_CP_ASSUME           1735      /* Assumed codepage */
 189 /* 1736 not used */
 190 #define MSG_SYSINIT_CP_FATAL            1737      /* Codepage switching disabled */
 191 #define MSG_SYSINIT_NOT_INIT_NMI        1738      /* cannot initial NMI ALSO FOR MODE MGR */
 192 #define MSG_ASYNC_INSTALL               1899      /* Com installed */
 193 #define MSG_ASYNC_COM_DEVICE            1900      /* COM device driver */
 194 /* 1901 - 1914 utilmid2 */
 195 #define MSG_INTERNAL_ERROR              1915      /* Internal error in the Kernel */
 196 #define MSG_USER_ERROR                  1916      /* user error */
 197 /* 1917 - 1918 not used */
 198 #define MSG_SYSINIT_UEXEC_FAIL          1919      /* User program won't execute */
 199 /* 1920 - 1924 not used */
 200 #define MSG_SYSINIT_SEXEC_FAIL          1925      /* System program won't execute */
 201 #define MSG_GEN_PROT_FAULT              1926      /* General protect fault trap d */
 202 #define MSG_CHANGE_INT_VECTOR           1927      /* real mode changed interrupt vector */
 203 #define MSG_NOMEM_FOR_RELOAD            1928      /* no storage to reload code or segment */
 204 #define MSG_STACK_OVERFLOW              1929      /* argument stack low */
 205 #define MSG_TRAP0                       1930      /* divide error */
 206 #define MSG_TRAP1                       1931      /* single step trap */
 207 #define MSG_TRAP2                       1932      /* hardware memory error */
 208 #define MSG_TRAP3                       1933      /* breakpoint instruction */
 209 #define MSG_TRAP4                       1934      /* computation overflow */
 210 #define MSG_TRAP5                       1935      /* index out of range */
 211 #define MSG_TRAP6                       1936      /* incorrect instruction */
 212 #define MSG_TRAP7                       1937      /* cannot process instruction */
 213 #define MSG_TRAP8                       1938      /* double exception error */
 214 #define MSG_TRAP9                       1939      /* math coprocessor */
 215 #define MSG_TRAPA                       1940      /* task state segment */
 216 #define MSG_TRAPB                       1941      /* segment not in memory */
 217 #define MSG_TRAPC                       1942      /* memory beyond the stack segment */
 218 #define MSG_TRAPD                       1943      /* bad segment value */
 219 #define MSG_NMI                         1944      /* nonmaskable interrupt */
 220 #define MSG_NMI_EXC1                    1945      /* error with memory system board */
 221 #define MSG_NM12_EXC2                   1946      /* error memory cards */
 222 #define MSG_NMI2_EXC3                   1947      /* timeout on dma */
 223 #define MSG_NMI2_EXC4                   1948      /* timeout by watchdog timer */
 224 /* 1949 not used */
 225 #define MSG_NPXIEMSG                    1950      /* incorrect operation */
 226 #define MSG_NPXDEMSG                    1951      /* denormalized operand */
 227 #define MSG_NPXZEMSG                    1952      /* zero divide */
 228 #define MSG_NPXOEMSG                    1953      /* overflow */
 229 #define MSG_NPXUEMSG                    1954      /* underflow */
 230 #define MSG_NPXPEMSG                    1955      /* precision */
 231 #define MSG_NPXINSTEMSG                 1956      /* error occurred at address */
 232 #define MSG_SYSINIT_BOOT_ERROR          2025      /* boot error */
 233 #define MSG_SYSINIT_BIO_NOT_FD          2026      /* COMMAND.COM not found */
 234 #define MSG_SYSINIT_INSER_DK            2027      /* Insert diskette */
 235 #define MSG_SYSINIT_DOS_NOT_FD          2028      /* IBMDOS.COM not found */
 236 #define MSG_SYSINIT_DOS_NOT_VAL         2029      /* IBMDOS.COM not valid */
 237 #define MSG_SYSINIT_MORE_MEM            2030      /* need more memory */
 238 /* 2031 - 2056 utilmid3 */
 239 /* 2057 - 2063 not used */
 240 #define MSG_SYSINIT_DOS_NO_MEM          2064      /* Out of memory starting DOS mode */
 241 #define MSG_SYSINIT_SYS_STOPPED         2065      /* System is stopped */
 242 #define MSG_SYSINIT_DOS_STOPPED         2066      /* DOS mode not started */
 243 #define MSG_SYSINIT_SDRVR_INVAL         2067      /* System device driver invalid */
 244 #define MSG_SYSINIT_MSG_LOST            2068      /* Messages lost */
 245 #define MSG_SYSINIT_UCFILE_INVAL        2069      /* User country file is bad */
 246 #define MSG_DEMAND_LOAD_FAILED          2070      /* the demand load has failed */