v4.0/src/H/UTILMID2.H

   1 /*      SCCSID = @(#)utilmid2.h 5.18 87/05/05 */
   2
   3 #define MSG_REST_FILE_FROM              1634      /* restore file from % 1 %2 */
   4 #define MSG_INS_BACKUP_DISK             1635      /* insert backup %1 in drive %2 */
   5 #define MSG_REST_DISK_OUT_SEQ           1636      /* diskette out of seq press key */
   6 #define MSG_REST_FILE_READ              1637      /* Warning file %1 read only */
   7 #define MSG_REST_CHNG_REPL              1638      /* file was changed after backup */
   8 #define MSG_REST_SYS                    1639      /* system files restored */
   9 #define MSG_REST_FILE_BACKUP            1640      /* files were backed up */
  10 #define MSG_REST_FILENAME               1641      /* filename restored */
  11 #define MSG_REST_SOUR_TARG_SAME         1642      /* source and target are same */
  12 #define MSG_REST_NUM_INVAL_PARA         1643      /* invalid number of para restore */
  13 #define MSG_REST_INVAL_SPEC             15        /* invalid drive */
  14 /* 1744 not used */
  15 #define MSG_REST_NO_FILE_FOUND          1645      /* not files found to restore */
  16 #define MSG_REST_INVAL_PARA             1002      /* invalid parameter %1 */
  17 #define MSG_REST_FILE_SHAR              1642      /* sharing conflict */
  18 /* 1646 - 1647 not used */
  19 #define MSG_REST_LAST_FILE_NOT          1648      /* last file not restored */
  20 #define MSG_REST_SOURCE_NO_BACK         1649      /* source does not contain backup files */
  21 #define MSG_REST_FILE_SEQ_ERROR         1651      /* sequence file out of sequence */
  22 #define MSG_REST_FILE_CREAT_ERROR       110       /* file creation error */
  23 /* 1652 - 1654 not used */
  24 #define MSG_REST_TARG_FULL              112       /* Target is full */
  25 #define MSG_REST_CANNOT_REST_FILE       1655      /* cannot restore file */
  26 #define MSG_REST_DISKETTE               1656      /* diskette %1 */
  27 #define MSG_REST_TARG_DISK              1657      /* insert targ disk in drive %1 */
  28 /* 1658 - 1663 unused */
  29 #define MSG_BACK_NUM_INVAL_PARA         1665      /* inval number of parameters */
  30 #define MSG_BACK_ERROR_LOG_FILE         1664      /* error writing log file */
  31 #define MSG_BACK_INVAL_PARA             1001      /* inval parameter */
  32 /* 1666 not used */
  33 #define MSG_BACK_NO_DRIV_SPEC           1667      /* no drive spec */
  34 #define MSG_BACK_NO_TARG_SPEC           1668      /* no target specified */
  35 #define MSG_BACK_INVAL_PATH             3         /* inval path */
  36 /* 1079 - 1670 not used */
  37 #define MSG_BACK_SOUR_TARG_SAME         1671      /* source target same */
  38 #define MSG_BACK_ERR_FORMAT_UTIL        1672      /* error executing format utility */
  39 #define MSG_BACK_INVAL_DATE             1036      /* inval date */
  40 /* 1673 - 1675 not used */
  41 #define MSG_BACK_INVAL_TIME             1044      /* inval time */
  42 #define MSG_BACK_INVAL_DRIV_SPEC        15        /* inval drive spec */
  43 #define MSG_BACK_CANNOT_FIND_FORM       1676      /* cannot find format util */
  44 #define MSG_BACK_ERROR_OPEN_LOGFILE     1677      /* error open logfile */
  45 #define MSG_BACK_CAN_FORM_UNREM_DR      1678      /* cannot form unremovable drive */
  46 #define MSG_BACK_LAST_NOT_INSERT        1679      /* last disk not inserted */
  47 #define MSG_BACK_LOG_TO_FILE            1680      /* log to file %2 */
  48 #define MSG_BACK_FILE_TARG_DRIVE        1681      /* warning file in target drive %2 */
  49 #define MSG_BACK_FILE_BACK_ERASE        1682      /* files in target drive %c */
  50 #define MSG_BACK_FILE_TO_DRIVE          1683      /* backup up files to drive d */
  51 #define MSG_BACK_DISK_NUM               1684      /* diskette number %2 */
  52 #define MSG_BACK_WARN_NO_FIL_FND        1685      /* warning no files were found to backup */
  53 #define MSG_BACK_INSERT_SOURCE          1686      /* insert backup source diskette in dr d */
  54 #define MSG_BACK_INSERT_BACKUP          1687      /* insert backup source disk %2 in dr */
  55 #define MSG_BACK_UNABLE_TO_BKUP         1688      /* not able to backup file */
  56 #define MSG_BACK_LAST_DISK_DRIVE        1689      /* insert last backup diskette in drive */
  57 #define MSG_BACK_TARG_NOT_USE_BKUP      1690      /* target cannot be used for backup */
  58 #define MSG_BACK_LAST_FILE_NO_BKUP      1691      /* last file not backed up */
  59 #define MSG_BACK_DEVICE_D_IS_FULL       1692      /* fixed backup device d is full */
  60 #define MSG_XCOPY_UNAB_CREATE_DIR       1693      /* unable to create directory */
  61 #define MSG_XCOPY_PATH_TOO_LONG         1694      /* path too long */
  62 #define MSG_XCOPY_BLANK_YN              1695      /* blank y/n */
  63 /* 1696 not used */
  64 #define MSG_XCOPY_READ_SOURCE_FILE      1697      /* reading source file */
  65 #define MSG_XCOPY_FILES_COPIED          1698      /* % files copied */
  66 #define MSG_XCOPY_FILE_NOT_FOUND        1699      /* % file not found */
  67 #define MSG_XCOPY_DOES_SPEC_FILENA      1700      /* Does % specify a filename */
  68 #define MSG_XCOPY_CANNOT_COPY_SUB       1701      /* cannot copy using /s to subdirectory */
  69 /* 1702 not used */
  70 #define MSG_XCOPY_INVAL_PARA            1001      /* invalid parameter xcopy */
  71 /* 1703 not used */
  72 #define MSG_XCOPY_INVAL_NUM_PAR         1704      /* invalid number of parameters xcopy */
  73 #define MSG_ANSI_EXT_SCR_KEY_ON         1705      /* ansi extended screen and keyboard on */
  74 #define MSG_ANSI_EXT_SCR_KEY_OFF        1706      /* ansi extended screen and keyboard off */
  75 #define MSG_ANSI_INVAL_PARA             1001      /* ansi invalid parameter */
  76 /* 1707 not used */
  77 /* 1708 - 1736 basemid */
  78 /* 1737 - 1740 unused */
  79 /* 1739 - 1740 unused */
  80 #define MSG_KEYB_TAB_NOT_EXIST          1741      /* translate table does not exist */
  81 #define MSG_KEYB_READ_TAB               1742      /* error reading translate table file */
  82 #define MSG_KEYB_INVAL_CODE             1454      /* Invalid keyboard layout code */
  83 /* 1743 not used */
  84 #define MSG_KEYB_SYS_ERR                1744      /* System error */
  85 #define MSG_KEYB_CODE_PAGE              1745      /* Code page not available */
  86 #define MSG_KEYB_TOO_MANY_PARMS         1454      /* Too many parms */
  87 /* 1746 not used */
  88 #define MSG_KEYB_DEF_LOAD               1747      /* Default ready loaded */
  89 #define MSG_KEYB_DOS_OPEN_ER            1748      /* Dos open error */
  90 /* 1749 not used */
  91 #define MSG_KEYB_INVAL_TYPE             1750      /* Invalid keyboard type */
  92 #define MSG_KEYB_ERR_LOAD_TRANS         1751      /* Invalid loading translate table */
  93 #define MSG_KEYB_LOADED                 1752      /* translate table loaded */
  94 /* 1753-1760 unused */
  95 #define MSG_CHCP_INVALID_PARAMETER      1761      /* invalid parameter */
  96 #define MSG_CHCP_TASK                   1762      /* unable to set process */
  97 /* 1763 - 1765 unused */
  98 #define MSG_CHCP_REPORT                 1766      /* active code page */
  99 #define MSG_CHCP_SYSTEM                 1767      /* Code page not prepared for system */
 100 #define MSG_CHCP_NO_CP                  1768      /* Code page not set for system */
 101 #define MSG_CHCP_DEVICE                 1769      /* Code page not prepared for device */
 102 /* 1770 - 1772 unused */
 103 #define MSG_START_INVALID_PARAMETER     1773      /* Invalid parameter to start command */
 104 /* 1774-1780 unused */
 105 #define MSG_SPOOLER_FONT_SWITCH         1781      /* error attempting to load font */
 106 #define MSG_SPOOLER_INVAL_CODE_PG       1782      /* code page id not valid */
 107 #define MSG_SPOOLER_ERR_OPEN_FONT       1783      /* error attempt to open font file */
 108 #define MSG_SPOOLER_ERR_READ_FONT       1784      /* error reading font file */
 109 #define MSG_SPOOLER_ERR_READ_CTRL       1784      /* error reading font file ctrl */
 110 #define MSG_SPOOLER_READ_DEFIN          1784      /* error reading font file blocks */
 111 /* 1785 - 1786 not used */
 112 #define MSG_SPOOLER_INVAL_PRINT         1787      /* invalid printer type in devinfo */
 113 #define MSG_SPOOLER_INSUF_STOR          1788      /* insuf storage to activate */
 114 #define MSG_SPOOLER_INCOR_FONT          1789      /* devinfo statement font incorrect */
 115 #define MSG_SPOOLER_INTER_ERR           1790      /* font switching internal error */
 116 #define MSG_SPOOLER_TOO_MANY_ROMS       1791      /* too many roms */
 117 #define MSG_SPOOLER_SOME_FONTS_BAD      1792      /* damaged font files */
 118 /* 1793-1799 unused */
 119 #define MSG_CMD_LOCK_VIOLATION          32        /* lock violation */
 120 /* 1800 - 1803 not used */
 121 #define MSG_CMD_NOT_DOS_DISK            26        /* media store not dos disk */
 122 #define MSG_CMD_NO_MEMORY               8         /* No more memory */
 123 #define MSG_CMD_FILE_NOT_FOUND          1804      /* File not found */
 124 #define MSG_CMD_ACCESS_DENIED           5         /* access denied */
 125 /* 1805 - 1808 not used */
 126 #define MSG_CMD_DRIVE_LOCKED            108       /* drive locked */
 127 #define MSG_CMD_SHARING_VIOLATION       32        /* sharing violation */
 128 #define MSG_CMD_SYS_ERR                 1809      /* A system error occurred */
 129 #define MSG_CMD_DIV_0                   1810      /* process terminated */
 130 #define MSG_CMD_SOFT_ERR                1811      /* fatal software error */
 131 #define MSG_CMD_COPROC                  1812      /* process terminated */
 132 #define MSG_CMD_KILLED                  1813      /* process killed */
 133 #define MSG_CMD_TOO_MANY_OPEN           1814      /* too many open files */
 134 /* 1815 - 1824 unused */
 135 #define MSG_PROG_CANT_FIND_FILE         1825      /* cant find file */
 136 #define MSG_PROG_NO_MEM                 1826      /* cannot process command */
 137 #define MSG_PROG_NON_RECOV              1827      /* cannot process request */
 138 #define MSG_PROG_CNT_START              1828      /* cannot start selected program */
 139 /* 1829  not used */
 140 #define MSG_PROG_NO_MOU                 1830      /* cannot set mou key assign */
 141 #define MSG_PROG_UNEXCEPT_FORMAT        1831      /* unacceptable executable format file */
 142 /* 1832 - 1838 unused */
 143 #define MSG_FDISK_WHOLEDISK_2           1839      /* maximum size */
 144 #define MSG_FDISK_CREATE_DOS_MENU       1840      /* create dos menu */
 145 #define MSG_FDISK_CREATE_DOS_EXT        1841      /* create dos extended partition */
 146 #define MSG_FDISK_CREATE_PRIME_HD       1842      /* create primary menu */
 147 #define MSG_FDISK_CREATE_EXT_HD         1843      /* create extended menu */
 148 #define MSG_FDISK_CREATE_LOG_HD         1844      /* create logical drive */
 149 #define MSG_FDISK_EXT_CREATED           1845      /* extended part created */
 150 #define MSG_FDISK_VOL_CREATED           1846      /* volume created */
 151 /* 1847 not used */
 152 #define MSG_FDISK_DEL_MENU              1848      /* delete menu */
 153 #define MSG_FDISK_DEL_LOG_DRV           1849      /* delete logical drive */
 154 #define MSG_FDISK_DEL_PRIM_DOS          1850      /* delete primary dos partition */
 155 #define MSG_FDISK_DEL_EXT_PART          1851      /* delete extended dos partition */
 156 #define MSG_FDISK_DEL_LOG_HD            1852      /* delete logical drive */
 157 #define MSG_FDISK_ALL_LOG_DEL           1853      /* logical drive deleted */
 158 #define MSG_FDISK_EXT_DEL               1854      /* extended partition deleted */
 159 /* 1855 not used */
 160 #define MSG_FDISK_EXT_PART_DEL          1856      /* extended dos partition deleted */
 161 #define MSG_FDISK_DRV_DEL               1857      /* drive deleted */
 162 /* 1858 not used */
 163 #define MSG_FDISK_CUR_PART_NOT_BOOT     1859      /* the partitions marked is boot */
 164 #define MSG_FDISK_WARN_LOG_LOST         1860      /* data in log drive will be lost */
 165 #define MSG_FDISK_WARN_EXT_LOST         1861      /* data in extended part will be lst */
 166 #define MSG_FDISK_SURE_QUERY            1862      /* are you sure? */
 167 #define MSG_FDISK_LOG_SIZE_INP          1863      /* logical drive size */
 168 #define MSG_FDISK_DISP_LOG_INFO_INP     1864      /* extended partition cont log dr */
 169 #define MSG_FDISK_ESC_TO_DOS            1865      /* press esc to return to dos */
 170 #define MSG_FDISK_DEFAULT_INP           1866      /* 1 */
 171 #define MSG_FDISK_MAX_LOG_SPACE         1867      /* total part avail is cylinders */
 172 #define MSG_FDISK_TOT_PART_SIZE         1868      /* Total partition size is cylinder */
 173 /* 1869 not used */
 174 #define MSG_FDISK_CUR_FDISK_LOG         1870      /* current fixed disk drive */
 175 /* 1871 not used */
 176 #define MSG_FDISK_DRV_LETTERS_CHNGD     1872      /* drive letter have changed or del */
 177 #define MSG_FDISK_BOOT_AL_ACT           1873      /* bootable part on drive 1 is act */
 178 #define MSG_FDISK_EXT_FULL              1874      /* avail space is assign to log dr */
 179 #define MSG_FDISK_NO_BOOT_EXIST         1875      /* only non-boot part on dr 1 */
 180 #define MSG_FDISK_ONLY_CURDRV_PART_ACT  1876      /* only part on drive 1 can be act */
 181 #define MSG_FDISK_MAX_LOGDRV_INS        1877      /* maximum number of log dos dr ins */
 182 /* 1878 not used */
 183 #define MSG_FDISK_CANT_DEL_PRIM         1879      /* cannot delete primary dos part */
 184 #define MSG_FDISK_MAX_AVAIL_SPACE       1880      /* max avail space for partit cyl */
 185 #define MSG_FDISK_LOG_INFO_HD           1881      /* drive start end size */
 186 #define MSG_FDISK_LOG_INFO              1882      /* 1 2 3 4 */
 187 #define MSG_FDISK_PART_INFO             1883      /* 1 2 3 4 5 6 7 8 */
 188 #define MSG_FDISK_ERR_EXT_EXIST         1884      /* extended part already exists */
 189 #define MSG_FDISK_ERR_NO_EXT            1885      /* no extended part to delete */
 190 /* 1886 not used */
 191 #define MSG_FDISK_PART_TOO_SMALL        1887      /* file partition too small */
 192 #define MSG_FDISK_ERR_PART_NOT_BOOT     1859      /* partition selected is not bootable */
 193 #define MSG_FDISK_ERR_NO_LOG_DEF        1888      /* no logical drives defined */
 194 #define MSG_FDISK_ERR_LOG_INP_2_BIG     1889      /* requested log drive size exceeds */
 195 #define MSG_FDISK_ERR_PART_INP_2_BIG    1890      /* requested part size exceeds max */
 196 #define MSG_FDISK_ERR_NO_PART_2_DEL     1891      /* no partitions to delete */
 197 #define MSG_FDISK_ERR_NO_PRIM_PART      1892      /* cannot create extend dos prim dk */
 198 #define MSG_FDISK_ERR_LOG_STILL_EXIST   1893      /* cannot delete extend part log dr */
 199 #define MSG_FDISK_ERR_0_PART_SPEC       1894      /* cannot create a zero cylinder pr */
 200 #define MSG_FDISK_ERR_DRV_DEL           1895      /* drive already deleted */
 201 #define MSG_FDISK_INTERNAL_ERROR        1896      /* internal error */
 202 #define MSG_FDISK_ERR_COMMAND_LINE      1897      /* unsupported switch ignored */
 203 #define MSG_START_NONE                  1898      /* screen group not started */
 204 #define MSG_MODE_COM_PORT               1901      /* query status not available */
 205 #define MSG_MODE_P_IGNORE               1902      /* P option ignored */
 206 /* 1903-1914 unused */
 207 /* 1915-1956 in basemid */
 208 /* 1957-1959 unused */