3 0001 U 0000 "Incorrect DOS version",CR,LF
4 0002 U 0000 "%1 already installed",CR,LF
5 0003 U 0000 "%1 bytes available on disk",CR,LF
6 0004 U 0000 "%1 bytes free",CR,LF
7 0005 U 0000 "%1 bytes in bad sectors",CR,LF
8 0006 U 0000 "%1 bytes total disk space",CR,LF
9 0007 U 0000 "%1 bytes total memory",CR,LF
10 0008 U 0000 "%1 bytes used by system",CR,LF
11 0009 U 0000 "%1 installed",CR,LF
12 0010 U 0000 "%1 not installed",CR,LF
13 0011 U 0000 "%1 not installed",CR,LF
14 0012 U 0000 "Cannot %1 a network drive",CR,LF
16 0014 U 0000 "Cannot %1 a SUBSTed or ASSIGNed drive",CR,LF
17 0015 U 0000 "Cannot execute %1",CR,LF
18 0016 U 0000 "Expanded Memory not available",CR,LF
19 0017 U 0000 "File allocation table bad, drive %1",CR,LF
20 0018 U 0000 "File cannot be copied onto itself",CR,LF
21 0019 U 0000 "Insert target disk in drive %1",CR,LF
22 0020 U 0000 "Insufficient disk space",CR,LF
23 0021 U 0000 "Invalid characters in volume label",CR,LF
24 0022 U 0000 "Invalid code page",CR,LF
25 0023 U 0000 "Invalid date",CR,LF
26 0024 U 0000 "Invalid time",CR,LF
27 0025 U 0000 "Invalid path",CR,LF
28 0026 U 0000 "No source drive specified",CR,LF
29 0027 U 0000 "No target drive specified",CR,LF
30 0028 U 0000 "Press any key to continue . . .",CR,LF
31 0029 U 0000 "Source path required",CR,LF
32 0030 U 0000 "System transferred",CR,LF
34 0032 U 0000 "Unable to create directory",CR,LF
35 0033 U 0000 "Volume in drive %1 has no label",CR,LF
36 0034 U 0000 "Volume in drive %1 is %2",CR,LF
37 0035 U 0001 "Volume label (11 characters, ENTER for none)? "
38 0036 U 0000 "Volume Serial Number is %1-%2",CR,LF
39 0037 U 0000 "Incorrect file type",CR,LF
42 0001 U 0003 "Invalid function"
43 0002 U 0000 "File not found"
44 0003 U 0000 "Path not found"
45 0004 U 0000 "Too many open files"
46 0005 U 0000 "Access denied "
47 0006 U 0000 "Invalid handle"
48 0007 U 0000 "Memory control blocks destroyed"
49 0008 U 0000 "Insufficient memory"
50 0009 U 0000 "Invalid memory block address"
51 0010 U 0000 "Invalid Environment"
52 0011 U 0000 "Invalid format"
53 0012 U 0000 "Invalid function parameter"
54 0013 U 0000 "Invalid data"
56 0015 U 0000 "Invalid drive specification"
57 0016 U 0000 "Attempt to remove current directory"
58 0017 U 0000 "Not same device"
59 0018 U 0000 "No more files"
60 0019 U 0000 "Write protect error"
61 0020 U 0000 "Invalid unit"
62 0021 U 0000 "Not ready"
63 0022 U 0000 "Invalid device request"
64 0023 U 0000 "Data error"
65 0024 U 0000 "Invalid device request parameters"
66 0025 U 0000 "Seek error"
67 0026 U 0000 "Invalid media type"
68 0027 U 0000 "Sector not found"
69 0028 U 0000 "Printer out of paper error"
70 0029 U 0000 "Write fault error"
71 0030 U 0000 "Read fault error"
72 0031 U 0000 "General failure"
73 0032 U 0000 "Sharing violation"
74 0033 U 0000 "Lock violation"
75 0034 U 0000 "Invalid disk change"
76 0035 U 0000 "FCB unavailable"
77 0036 U 0000 "System resource exhausted"
78 0037 U 0000 "Code page mismatch"
79 0038 U 0000 "Out of input"
80 0039 U 0000 "Insufficient disk space"
91 0050 U 0000 "NET809: Network request not supported"
92 0051 U 0000 "NET801: Remote computer not listening"
93 0052 U 0000 "NET802: Duplicate name on network"
94 0053 U 0000 "NET803: Network path not found"
95 0054 U 0000 "NET804: Network busy"
96 0055 U 0000 "NET805: Network device no longer exists"
97 0056 U 0000 "NET806: NETBIOS command limit exceeded"
98 0057 U 0000 "NET807: System error; NETBIOS error"
99 0058 U 0000 "NET808: Incorrect response from network"
100 0059 U 0000 "NET810: Unexpected network error"
101 0060 U 0000 "NET811: Incompatible remote adapter"
102 0061 U 0000 "NET812: Print queue full"
103 0062 U 0000 "NET813: Not enough space for print file"
104 0063 U 0000 "NET814: Print file was cancelled"
105 0064 U 0000 "NET815: Network name was deleted"
106 0065 U 0000 "Access denied"
107 0066 U 0000 "NET817: Network device type incorrect"
108 0067 U 0000 "NET818: Network name not found"
109 0068 U 0000 "NET819: Network name limit exceeded"
110 0069 U 0000 "NET820: NETBIOS session limit exceeded"
111 0070 U 0000 "NET821: Sharing temporarily paused"
112 0071 U 0000 "NET823: Network request not accepted"
113 0072 U 0000 "NET822: Print or disk redirection is paused"
114 0073 U 0000 "NET476: Netbeui not loaded"
115 0074 U 0000 "NET477: Unexpected adapter close"
121 0080 U 0004 "File exists"
123 0082 U 0004 "Cannot make directory entry"
124 0083 U 0004 "Fail on INT 24"
125 0084 U 0004 "Too many redirections"
126 0085 U 0004 "Duplicate redirection"
127 0086 U 0004 "Invalid password"
128 0087 U 0004 "Invalid parameter"
129 0088 U 0004 "Network data fault"
130 0089 U 0004 "Function not supported by network"
131 0090 U 0002 "Required system component not installed"
133 0001 U 0000 "Too many parameters"
134 0002 U 0000 "Required parameter missing"
135 0003 U 0000 "Invalid switch"
136 0004 U 0000 "Invalid keyword"
138 0006 U 0000 "Parameter value not in allowed range"
139 0007 U 0000 "Parameter value not allowed"
140 0008 U 0000 "Parameter value not allowed"
141 0009 U 0000 "Parameter format not correct"
142 0010 U 0000 "Invalid parameter"
143 0011 U 0000 "Invalid parameter combination"
152 0211 U 0000 ", Retry"
153 0212 U 0000 ", Ignore"
156 0215 U 0000 "reading",0
157 0216 U 0000 "writing",0
158 0217 U 0000 " %1 drive %2",CR,LF
159 0218 U 0000 " %1 device %2",CR,LF
160 0219 U 0000 "Please insert volume %1 serial %2-%3",CR,LF
161 0221 U 0000 "Invalid COMMAND.COM",CR,LF
162 0222 U 0000 "Insert disk with %1 in drive %2",CR,LF
163 0224 U 0000 CR,LF,"Terminate batch job (Y/N)?"
164 0225 U 0000 "Cannot execute %1",CR,LF
165 0226 U 0000 "Error in EXE file",CR,LF
166 0227 U 0000 "Program too big to fit in memory",CR,LF
167 0228 U 0000 CR,LF,"No free file handles"
168 0229 U 0000 "Bad Command or file name",CR,LF
169 0231 U 0000 CR,LF,"Memory allocation error"
170 0232 U 0000 CR,LF,"Cannot load COMMAND, system halted",CR,LF
171 0233 U 0000 CR,LF,"Cannot start COMMAND, exiting",CR,LF
172 0234 U 0000 CR,LF,"Top level process aborted, cannot continue",CR,LF
174 0463 U 0000 "Out of environment space",CR,LF
175 0464 U 0001 CR,LF,CR,LF,"Microsoft(R) MS-DOS(R) Version 4.00",CR,LF
176 " (C)Copyright Microsoft Corp 1981-1988",CR,LF
177 0465 U 0000 "Specified COMMAND search directory bad",CR,LF
178 0466 U 0000 "Specified COMMAND search directory bad access denied",CR,LF
179 1002 U 0000 "Duplicate file name or file not found",CR,LF
180 1003 U 0000 "Invalid path or file name",CR,LF
181 1007 U 0000 "Out of environment space",CR,LF
182 1008 U 0000 "File creation error",CR,LF
183 1009 U 0000 "Batch file missing",CR,LF
184 1010 U 0000 CR,LF,"Insert disk with batch file",CR,LF
185 1011 U 0000 "Bad command or file name",CR,LF
186 1016 U 0000 "Content of destination lost before copy",CR,LF
187 1017 U 0000 "Invalid filename or file not found",CR,LF
188 1018 U 0000 "%1 File(s) copied",CR,LF
189 1019 U 0000 "%1 File(s) "
190 1022 U 0000 "Code page %1 not prepared for system",CR,LF
191 1023 U 0000 "Code page %1 not prepared for all devices",CR,LF
192 1024 U 0000 "Active code page: %1",CR,LF
193 1025 U 0000 "NLSFUNC not installed",CR,LF
194 1027 U 0000 "Current drive is no longer valid"
195 1029 U 0000 "Label not found",CR,LF
196 1030 U 0000 "Syntax error",CR,LF
197 1032 U 0000 "Current date is %1 %2",CR,LF
198 1033 U 0000 "SunMonTueWedThuFriSat"
199 1034 U 0000 "Enter new date (%1): "
200 1036 U 0000 "Current time is %1",CR,LF
201 1037 U 0000 "Enter new time: "
202 1038 U 0000 ", Delete (Y/N)?"
203 1039 U 0000 "All files in directory will be deleted!",CR,LF
204 "Are you sure (Y/N)?"
205 1040 U 0000 "MS-DOS Version %1.%2"
206 1044 U 0000 "Invalid directory",CR,LF
207 1046 U 0000 "Invalid path, not directory,",CR,LF,"or directory not empty",CR,LF
208 1047 U 0000 "Must specify ON or OFF",CR,LF
209 1048 U 0000 "Directory of %1",CR,LF
210 1049 U 0000 "No Path",CR,LF
211 1050 U 0000 "Invalid drive in search path",CR,LF
212 1051 U 0000 "Invalid device",CR,LF
213 1052 U 0000 "FOR cannot be nested",CR,LF
214 1053 U 0000 "Intermediate file error during pipe",CR,LF
215 1054 U 0000 "Cannot do binary reads from a device",CR,LF
216 1055 U 0000 "BREAK is %1",CR,LF
217 1056 U 0000 "VERIFY is %1",CR,LF
218 1057 U 0000 "ECHO is %1",CR,LF
221 1061 U 0000 "Error writing to device",CR,LF
227 1068 U 0000 " <DIR> "
231 1072 U 0000 "mm-dd-yy"
232 1073 U 0000 "dd-mm-yy"
233 1074 U 0000 "yy-mm-dd"
237 1078 U 0000 "Directory already exists",CR,LF
239 0004 U 0000 "Invalid number of parameters",CR,LF
240 0005 U 0000 "Invalid path or file not found",CR,LF
241 0006 U 0000 "Syntax error",CR,LF
243 0009 U 0000 "%1 %2",CR,LF
244 0010 U 0000 "%1",CR,LF,"%2",CR,LF
245 0011 U 0000 "%1, Code page mismatch",CR,LF,"Are you sure (Y/N)?"
246 0012 U 0000 "%1",CR,LF
248 0015 U 0000 "Invalid file type value",CR,LF
249 0199 U 0000 "Extended attribute error",CR,LF
250 0201 U 0000 "Extended attribute name not found",CR,LF
251 0204 U 0000 "Extended attribute name cannot be set",CR,LF
252 0205 U 0000 "Extended attribute name known to this file system but not supported",CR,LF
253 0206 U 0000 "Extended attribute type mismatch",CR,LF
254 0208 U 0000 "Extended attribute value not supported",CR,LF
256 0002 U 0000 "Original %1: set to %2:",cr,lf
258 0003 U 0000 "Convert lost chains to files (Y/N)?"
259 0004 U 0000 "Unrecoverable error in directory"
260 0005 U 0000 "Convert directory to file (Y/N)?"
261 0007 U 0000 "%1 bytes total disk space"
262 0008 U 0000 "%1 bytes in bad sectors"
263 0009 U 0000 "%1 bytes in %2 hidden files"
264 0010 U 0000 "%1 bytes in %2 directories"
265 0011 U 0000 "%1 bytes in %2 user files"
266 0012 U 0000 "%1 bytes in %2 recovered files"
267 0013 U 0000 "%1 bytes would be in %2 recovered files"
268 0014 U 0000 "%1 bytes available on disk"
269 0015 U 0000 "%1 total bytes memory"
270 0016 U 0000 "%1 bytes free"
271 0017 U 0000 "Cannot CHKDSK a network drive"
272 0018 U 0000 "Cannot CHKDSK a SUBSTed or ASSIGNed drive"
273 0019 U 0000 "Probable non-DOS disk",CR,LF,"Continue (Y/N)?"
274 0020 U 0000 "Disk error reading FAT %1",CR,LF
275 0021 U 0000 "Directory %1"
276 0022 U 0000 "%1 Contains %2 non-contiguous blocks"
277 0023 U 0000 "All specified file(s) are contiguous"
278 0024 U 0000 "Errors found, F parameter not specified",CR,LF,"Corrections will not be written to disk"
279 0025 U 0000 " Processing cannot continue %1%2"
280 0026 U 0000 " File allocation table bad, drive %1"
281 0029 U 0000 " CHDIR .. failed, trying alternate method"
282 0030 U 0001 " Has invalid allocation unit, file truncated"
283 0031 U 0000 " Invalid sub-directory entry"
284 0032 U 0000 " Does not exist"
285 0033 U 0001 " First allocation unit is invalid, entry truncated"
286 0034 U 0000 " Allocation error, size adjusted"
287 0035 U 0000 " Cannot recover .. entry, processing continued"
288 0036 U 0000 " Directory is totally empty, no . or .."
289 0037 U 0000 " Directory is joined"
290 0038 U 0000 " Cannot recover .. entry"
291 0039 U 0000 " Entry has a bad link"
292 0040 U 0000 " Entry has a bad attribute"
293 0041 U 0000 " Entry has a bad size"
294 0042 U 0001 " Is cross linked on allocation unit %1"
295 0043 U 0000 " Cannot CHDIR to %1,",CR,LF,"tree past this point not processed"
296 0044 U 0000 " tree past this point not processed"
297 0045 U 0000 "%1 bytes disk space freed"
298 0046 U 0000 "%1 bytes disk space would be freed"
299 0047 U 0000 "Volume %1 created %2 %3",CR,LF
300 0048 U 0000 "%1 total allocation units on disk"
301 0049 U 0000 "%1 bytes in each allocation unit"
302 0050 U 0000 "CHKDSK not available on drive %1"
303 0051 U 0001 " Extended Attributes has invalid allocation units, attributes truncated"
304 0052 U 0000 " Extended Attributes allocation error , attributes truncated"
305 0053 U 0000 "Invalid parameter"
306 0055 U 0000 "Path not found"
307 0056 U 0000 "File not found"
308 0058 U 0001 " %1 lost allocation units found in %2 chains."
310 0060 U 0000 " Cannot CHDIR to root",CR,LF
311 0061 U 0000 " Disk error writing FAT %1"
313 0063 U 0000 "Invalid current directory"
314 0064 U 0000 "%1",CR,LF
315 0065 U 0000 " Insufficient room in root directory",CR,LF," Move files from root directory and repeat CHKDSK"
316 0066 U 0000 "%1 %2 %3"
317 0067 U 0000 "%1 %2, %3"
318 0068 U 0000 "%1%2%3%4%5"
319 0069 U 0000 "%1%2%3%4"
320 0070 U 0000 "%1 available allocation units on disk"
322 0004 U 0000 "Allocation failed or specified buffer too small",CR,LF
323 0006 U 0000 "Bad device name"
324 0007 U 0000 "Cannot open list device PRN",CR,LF
325 "Enter name of list device? "
327 0009 U 0000 CR,LF,"Program terminated normally",CR,LF
328 0010 U 0001 "Invalid drive specification",CR,LF
329 0012 U 0001 "File creation error",CR,LF
330 0013 U 0001 "Insufficient space on disk",CR,LF
331 0014 U 0001 "Disk error reading drive %1",CR,LF
332 0015 U 0001 "Disk error writing drive %1",CR,LF
333 0016 U 0001 "Write protect error reading drive %1",CR,LF
334 0017 U 0001 "Write protect error writing drive %1",CR,LF
335 0019 U 0000 "%1^ Error"
336 0020 U 0001 "Error in EXE or HEX file",CR,LF
337 0021 U 0001 "EXE and HEX files cannot be written",CR,LF
338 0022 U 0000 "EXEC failure"
339 0023 U 0001 "(W)rite error, no destination defined",CR,LF
340 0024 U 0001 "Access denied",CR,LF
341 0025 U 0000 "Parity error or nonexistent memory error detected"
345 0033 U 0000 "%1:%2 %3"
347 0035 U 0000 "%1 %2",CR,LF,":"
349 0037 U 0000 "%1 Error"
350 0038 U 0000 "Writing %1 bytes"
354 0042 U 0000 "%1:%2 %3 %4 %5:%6"
358 0050 U 0000 "%1 of a total %2 EMS pages have been allocated",cr,lf
359 0051 U 0000 "%1 of a total %2 EMS handles have been allocated",cr,lf
360 0055 U 0000 "Handle created = %1 ",cr,lf
361 0056 U 0000 "Logical page %1 mapped to physical page %2 ",cr,lf
362 0057 U 0001 "EMS hardware/software failure",cr,lf
363 0058 U 0000 "Handle not found",cr,lf
364 0059 U 0000 "Invalid function code",cr,lf
365 0060 U 0000 "No free handles",cr,lf
366 0061 U 0000 "Save/Restore error",cr,lf
367 0062 U 0000 "Total pages exceeded",cr,lf
368 0063 U 0000 "Free pages exceeded",cr,lf
369 0064 U 0000 "Parameter error",cr,lf
370 0065 U 0000 "Logical Page out of range",cr,lf
371 0066 U 0000 "Physical Page out of range",cr,lf
372 0067 U 0000 "Save area already in use",cr,lf
373 0068 U 0000 "Save area not in use",cr,lf
374 0070 U 0001 "General EMS error",cr,lf
375 0071 U 0000 "Missing or invalid EMS parameter",cr,lf
376 0072 U 0000 "Handle %1 has %2 pages allocated",cr,lf
377 0075 U 0000 "Physical page %1 = Frame segment %2",cr,lf
378 0076 U 0003 "Handle %1 deallocated",cr,lf
379 0078 U 0000 "EMS not installed",cr,lf
381 0002 U 0000 "No drive specified",CR,LF
382 0003 U 0000 "Loaded External Disk Driver for Drive %1",CR,LF
385 0007 U 0000 "Invalid drive or file name",CR,LF
386 0008 U 0000 "File name must be specified",CR,LF
387 0010 U 0000 "File is READ-ONLY",CR,LF
388 0011 U 0000 "File Creation Error",CR,LF
389 0012 U 0000 "Too many files open",CR,LF
390 0013 U 0000 "Read error in:",CR,LF,"%1",CR,LF
391 0014 U 0000 "Cannot edit .BAK file--rename file",CR,LF
392 0015 U 0000 "No room in directory for file",CR,LF
393 0016 U 0000 "Disk full. Edits lost.",CR,LF
394 0017 U 0000 "File not found",CR,LF
395 0018 U 0000 "Entry error",CR,LF
396 0019 U 0000 "New file",CR,LF
397 0020 U 0000 "Not found",CR,LF
399 0022 U 0000 "Line too long",CR,LF
400 0023 U 0000 "End of input file",CR,LF
401 0024 U 0000 "Abort edit (Y/N)? "
402 0025 U 0000 "Must specify destination line number",CR,LF
403 0026 U 0000 "Not enough room to merge the entire file",CR,LF
406 0029 U 0000 "Continue (Y/N)?"
407 0030 U 0000 "Unable to print message",CR,LF
410 0033 U 0000 "Cannot merge - code page mismatch",CR,LF
412 0002 U 0000 "Insufficient memory",CR,LF
413 0003 U 0000 "Cannot find messages",CR,LF
414 0004 U 0000 "Access denied",CR,LF
415 0005 U 0000 "File cannot be converted",CR,LF
416 0006 U 0000 "File not found",CR,LF
417 0007 U 0000 "File creation error",CR,LF
418 0008 U 0000 "Fix-ups needed - base segment (hex):"
419 0012 U 0000 "File name must be specified",CR,LF
423 0002 U 0000 CR,"%1 percent of disk formatted ",CR
424 0004 U 0003 CR,"Format complete ",CR,LF
425 0007 U 0000 "Insert new diskette for drive %1:",CR,LF
426 0009 U 0000 "Re-insert diskette for drive %1:",CR,LF
427 0011 U 0000 CR,"Format not supported on drive %1:", CR,LF
428 0012 U 0000 CR,"Invalid device parameters from device driver",CR,LF
429 0013 U 0000 CR,"Error in IOCTL call ",CR,LF
430 0014 U 0000 CR,"Not a block device ",CR,LF
431 0015 U 0000 CR,"Error writing FAT ",CR,LF
432 0016 U 0000 CR,"Error writing directory",CR,LF
433 0017 U 0000 CR,"Cannot format an ASSIGNed or SUBSTed drive. ",CR,LF
434 0018 U 0000 CR,"Cannot find System Files",CR,LF
435 0019 U 0000 CR,"Cannot FORMAT a network drive",CR,LF
436 0021 U 0000 CR,"Parameters not supported",CR,LF
437 0022 U 0003 CR,"Format terminated ",CR,LF
438 0023 U 0000 CR,"Disk unsuitable for system disk",CR,LF
439 0024 U 0000 CR,"Invalid media or Track 0 bad - disk unusable",CR,LF
440 0025 U 0000 CR,"Unable to write BOOT ",CR,LF
441 0026 U 0000 CR,"Error reading directory",CR,LF
442 0028 U 0000 CR,"and press ENTER when ready..."
443 0029 U 0000 CR,"Invalid Volume ID ",CR,LF
444 0031 U 0000 CR,"Enter current volume label for drive %1: "
445 0032 U 0000 CR,"Parameters not compatible",CR,LF,"with fixed disk",CR,LF
446 0035 U 0000 CR,"Error reading partition table",CR,LF
447 0037 U 0000 CR,"Format broken",CR,LF
448 0038 U 0000 CR,"Format not available on drive %1",CR,LF
449 0039 U 0000 CR,"Non-System disk or disk error",CR,LF
450 0040 U 0000 CR,"Bad Partition Table ",CR,LF
451 0041 U 0000 CR,"Parameters not supported by drive",CR,LF
454 0044 U 0000 CR,"Insert DOS disk in drive %1:",CR,LF
455 0045 U 0000 CR,LF,"WARNING, ALL DATA ON NON-REMOVABLE DISK",CR,LF
456 "DRIVE %1: WILL BE LOST!",CR,LF
457 "Proceed with Format (Y/N)?"
458 0046 U 0000 CR,"Format another (Y/N)?"
459 0047 U 0000 CR,"Error reading partition table",CR,LF
460 0048 U 0000 CR,"Error writing partition table",CR,LF
461 0049 U 0000 CR,"Parameters not compatible", CR,LF
462 0050 U 0000 "%1 allocation units available on disk",CR,LF
463 0051 U 0000 "%1 bytes in each allocation unit",CR,LF
464 0052 U 0000 CR, "Error writing partition table",CR,LF
465 0053 U 0000 CR,"Same parameter entered twice",CR,LF
466 0054 U 0000 CR,"Must enter both /T and /N parameters",CR,LF
467 0055 U 0000 CR,"Attempting to recover allocation unit %1 ",CR
469 0002 U 0001 "Directory not empty",CR,LF
471 0002 U 0000 "-- More --"
474 0006 U 0000 " error reading file",CR,LF,"$"
475 0007 U 0000 "File not found",CR,LF,"$"
476 0008 U 0000 CR,LF,LF,"File $"
477 0009 U 0000 " canceled by operator$"
478 0010 U 0000 CR,LF,LF,"All files canceled by operator$"
479 0011 U 0000 "File allocation table bad drive "
480 0012 U 0000 "A.",CR,LF,"$"
481 0013 U 0000 "List output is not assigned to a device",CR,LF
482 0014 U 0000 "Resident part of PRINT installed",CR,LF
483 0015 U 0000 "Cannot use PRINT - Use NET PRINT",CR,LF
484 0017 U 0000 "PRINT queue is full",CR,LF
485 0018 U 0000 "PRINT queue is empty",CR,LF
486 0019 U 0000 "Access denied",CR,LF
487 0020 U 0000 "Invalid drive specification",CR,LF
488 0021 U 0000 "Errors on list device indicate that it",CR,LF
489 "may be off-line. Please check it.",CR,LF
490 0022 U 0000 CR,LF,LF," %1 is currently being printed",CR,LF
491 0023 U 0000 " %1 is in queue",CR,LF
492 0025 U 0001 "Pathname too long",CR,LF
493 0026 U 0001 "File not in PRINT queue",CR,LF
494 0027 U 0000 "Name of list device [PRN]: "
496 0002 U 0000 CR,LF,"File not found",CR,LF
497 0003 U 0000 CR,LF,"Cannot RECOVER an ASSIGNed or SUBSTed drive",CR,LF
498 0004 U 0000 CR,LF,"Invalid drive or file name",CR,LF
499 0005 U 0000 CR,LF,"WARNING - directory full",CR,LF
500 0006 U 0000 CR,LF,"Cannot RECOVER a network drive", CR,LF
501 0008 U 0000 CR,LF,"%1 file(s) recovered",CR,LF
502 0009 U 0000 CR,LF,"%1 of %2 bytes recovered",CR,LF
503 0010 U 0000 CR,LF,"Press any key to begin recovery of the",CR,LF,"file(s) on drive %1",CR,LF,CR,LF
504 0011 U 0000 CR,LF,"Cannot read file allocation table",CR,LF
505 0012 U 0000 CR,LF,"Cannot write file allocation table",CR,LF
510 0002 U 0001 "Incorrect number of parameters",CR,LF
512 0004 U 0000 "Invalid drive specification",CR,LF
513 0007 U 0000 "No room for system on destination disk",CR,LF
514 0008 U 0001 "Invalid path or System files not found",CR,LF
515 0010 U 0000 "No system on default drive",CR,LF
516 0011 U 0000 "Cannot specify default drive",CR,LF
517 0012 U 0000 "Write failure, diskette unusable",CR,LF
518 0014 U 0000 "Insert system disk in drive %1",CR,LF
519 0016 U 0000 "Not able to SYS to %1 file system",CR,LF
523 0010 U 0000 "Invalid parameter - %1",CR,LF
525 0004 U 0001 "Invalid configuration",CR,LF
527 0003 U 0000 13,10,"Unrecognized command in CONFIG.SYS"
528 0004 U 0000 13,10,"$"
529 0005 U 0000 13,10,"Sector size too large in file $"
530 0006 U 0000 13,10,"Bad or missing $"
531 0007 U 0000 "Command Interpreter",0
532 0008 U 0000 13,10,"Invalid country code or code page",13,10,"$"
533 0009 U 0000 13,10,"Error in COUNTRY command",13,10,"$"
534 0010 U 0000 13,10, "Insufficient memory for COUNTRY.SYS file",13,10,"$"
535 0011 U 0000 13,10,"Configuration too large for memory",13,10,"$"
536 0012 U 0000 13,10,"Too many block devices",13,10,"$"
537 0013 U 0000 13,10,"Invalid STACK parameters",13,10,"$"
538 0014 U 0000 13,10,"Incorrect order in CONFIG.SYS line ","$"
539 0015 U 0000 "Error in CONFIG.SYS line ","$"
540 0016 U 0000 13,10,"Memory allocation error ","$"
541 0017 U 0001 0DH,0AH,7,0DH,0AH, "Internal stack overflow",0DH,0AH
542 "System halted",0DH,0AH,"$"
543 0020 U 0000 13,10,"Insert diskette for drive "
544 0021 U 0000 "A: and press any key when ready",13,10,10,0
545 0022 U 0000 13,10,"Bad command or parameters - $"
546 0023 U 0002 "WARNING! SHARE should be loaded for large media",13,10,"$"
548 0001 U 0000 13,10,"Non-System disk or disk error",13,10
549 "Replace and press any key when ready",13,10,0
552 0001 U 0001 13,10,"Divide overflow",13,10
556 0002 U 0000 " error reading file",CR,LF,FORMFD,BELL,"$"
557 0003 U 0000 CR,LF,LF,"File canceled by operator",CR,FORMFD,BELL
558 0004 U 0000 "File allocation table bad drive "
559 0005 U 0000 "A.",CR,LF,"$"
560 0006 U 0000 "List output is not assigned to a device",CR,LF
561 0007 U 0000 "PSPRINT is allready installed",CR,LF
562 0008 U 0000 "PSPRINT/PRINT conflict",CR,LF
564 0002 U 0000 CR,LF,"Insufficient memory",CR,LF
565 0006 U 0000 CR,LF,"Invalid drive specification",CR,LF
566 0014 U 0000 CR,LF,"Source and target drives are the same",CR,LF
567 0015 U 0001 CR,LF,"Error executing FORMAT",CR,LF
568 0016 U 0001 CR,LF,"Cannot find FORMAT.COM",CR,LF
569 0017 U 0000 CR,LF,"Error opening logfile",CR,LF
570 0018 U 0000 CR,LF,"Logging to file %1",CR,LF
571 0019 U 0000 CR,LF,"Last backup diskette not inserted",CR,LF
572 0020 U 0000 CR,LF,"WARNING! Files in the target drive",CR,LF
573 "%1:\ root directory will be erased",CR,LF
574 0021 U 0000 CR,LF,"WARNING! Files in the target drive",CR,LF
575 "%1:\BACKUP directory will be erased",CR,LF
576 0022 U 0000 CR,LF,"*** Backing up files to drive %1: ***",CR,LF
577 0023 U 0000 "Diskette Number: %1",CR,LF
578 0024 U 0000 CR,LF,"WARNING! No files were found to back up",CR,LF
579 0025 U 0000 CR,LF,"Insert backup source diskette in drive %1:",CR,LF
580 0026 U 0000 CR,LF,"Insert backup diskette %1 in drive %2:",CR,LF
581 0027 U 0000 CR,LF,"*** Not able to backup file ***",CR,LF
582 0028 U 0000 CR,LF,"Insert last backup diskette in drive %1:",CR,LF
583 0029 U 0000 CR,LF,"Target cannot be used for backup",CR,LF
584 0030 U 0000 CR,LF,"*** Last file not backed up ***",CR,LF
585 0031 U 0000 CR,LF,"Fixed backup device %1: is full",CR,LF
586 0032 U 0000 CR,LF,"Disk full error writing to BACKUP Log File",CR,LF
588 0035 U 0001 CR,LF,"Cannot FORMAT nonremovable drive %1:",CR,LF
590 0001 U 0001 "Cannot exec BASICA.COM"
592 0004 U 0000 "10 Mismatches - ending compare",CR,LF
593 0006 U 0000 "Compare error at OFFSET %1",CR,LF
594 0007 U 0000 "File 1 = %1",CR,LF
595 0008 U 0000 "File 2 = %1",CR,LF
596 0009 U 0000 "EOF mark not found",CR,LF
597 0010 U 0000 "Files compare OK",CR,LF
598 0015 U 0000 CR,LF,CR,LF,"Enter primary filename",CR,LF
599 0016 U 0000 CR,LF,CR,LF,"Enter 2nd filename or drive id",CR,LF
600 0017 U 0000 "Files are different sizes",CR,LF
601 0018 U 0000 "Compare more files (Y/N) ?"
602 0019 U 0000 "%1 and %2",CR,LF
604 0023 U 0000 "Files compare OK",CR,LF
606 0004 U 0000 "Do not specify filename(s)",CR,LF
607 "Command format: DISKCOMP d: d: [/1][/8]",LF,CR
608 0005 U 0000 CR,LF,"Invalid drive specification",CR,LF
609 "Specified drive does not exist",CR,LF
610 "or is non-removable",CR,LF
611 0006 U 0000 CR,LF,"Cannot DISKCOMP to or from",CR,LF
612 "a network drive",CR,LF
613 0007 U 0000 CR,LF,"Insert FIRST diskette in drive %1:",CR,LF
614 0008 U 0000 CR,LF,"Insert SECOND diskette in drive %1:",CR,LF
615 0009 U 0000 CR,LF,"FIRST diskette bad or incompatible",CR,LF
616 0010 U 0000 CR,LF,"SECOND diskette bad or incompatible",CR,LF
617 0014 U 0000 CR,LF,"Compare another diskette (Y/N) ?"
618 0015 U 0000 CR,LF,"Comparing %1 tracks",CR,LF
619 "%2 sectors per track, %3 side(s)",CR,LF
620 0016 U 0000 CR,LF,"Drive types or diskette types",CR,LF
621 "not compatible",CR,LF
622 0017 U 0000 CR,LF,"Unrecoverable read error on drive %2",CR,LF
623 "side %3, track %4",CR,LF
624 0018 U 0000 CR,LF,"Compare error on",CR,LF,"side %3, track %4",CR,LF
625 0019 U 0000 "Make sure a diskette is inserted into",CR,LF
626 "the drive and the door is closed",CR,LF
627 0020 U 0000 CR,LF,"Compare process ended",CR,LF
628 0021 U 0000 CR,LF,"Compare OK",CR,LF
632 0004 U 0000 "Do not specify filename(s)",CR,LF
633 "Command Format: DISKCOPY d: d: [/1]",CR,LF
634 0005 U 0000 CR,LF,"Invalid drive specification",CR,LF
635 "Specified drive does not exist",CR,LF
636 "or is non-removable",CR,LF
637 0006 U 0000 CR,LF,"Cannot DISKCOPY to or from",CR,LF
638 "a network drive",CR,LF
639 0007 U 0000 CR,LF,"Formatting while copying",CR,LF
640 0008 U 0000 CR,LF,"Insert SOURCE diskette in drive %1:",CR,LF
641 0009 U 0000 CR,LF,"Insert TARGET diskette in drive %1:",CR,LF
642 0010 U 0000 "Make sure a diskette is inserted into",CR,LF
643 "the drive and the door is closed",CR,LF
644 0011 U 0000 CR,LF,"Target diskette may be unusable",CR,LF
645 0012 U 0000 CR,LF,"Target diskette unusable",CR,LF
646 0016 U 0000 CR,LF,"Copy another diskette (Y/N)? "
647 0017 U 0000 CR,LF,"Copying %1 tracks",CR,LF
648 "%2 Sectors/Track, %3 Side(s)",CR,LF
649 0018 U 0000 CR,LF,"Drive types or diskette types",CR,LF
650 "not compatible",CR,LF
651 0019 U 0000 CR,LF,"Unrecoverable read error on drive %1",CR,LF
652 "Side %2, track %3",CR,LF
653 0020 U 0000 CR,LF,"Unrecoverable write error on drive %1",CR,LF
654 "Side %2, track %3",CR,LF
655 0021 U 0000 CR,LF,"Copy process ended",CR,LF
656 0022 U 0000 CR,LF,"SOURCE diskette bad or incompatible"
657 0023 U 0000 CR,LF,"TARGET diskette bad or incompatible"
659 0009 U 0003 CR,LF,"Delete current volume label (Y/N)? "
661 0003 U 0000 CR,LF,"Must specify COM1, COM2, COM3 or COM4",CR,LF
662 0004 U 0000 CR,LF,"Resident portion of MODE loaded",CR,LF
663 0005 U 0000 CR,LF,"Illegal device name",CR,LF
664 0006 U 0000 CR,LF,"Printer error",CR,LF
665 0007 U 0000 CR,LF,"LPT%1: set for 80",CR,LF
666 0008 U 0000 CR,LF,"LPT%1: set for 132",CR,LF
667 0009 U 0000 CR,LF,"Printer lines per inch set",CR,LF
668 0010 U 0000 CR,LF,"Invalid baud rate specified",CR,LF
669 0011 U 0000 CR,LF,"COM%1: %2,%3,%4,%5,%6",CR,LF
670 0012 U 0000 "0123456789"
671 0013 U 0001 CR,LF,"Do you see the %1? (Y/N) "
672 0015 U 0000 "LPT%1: rerouted to COM%2:",CR,LF
673 0016 U 0000 "LPT%1: not rerouted",CR,LF
674 0017 U 0000 CR,LF,"%1 retry on parallel printer time-out",CR,LF
675 0018 U 0000 CR,LF," Unable to shift screen %1",CR,LF
676 0020 U 0000 CR,LF,"Invalid number of parameters",CR,LF
677 0021 U 0000 CR,LF,"NET 042: Unable to do requested command",CR,LF
678 0022 U 0001 CR,LF,"Infinite retry not supported on network printer",CR,LF
679 0023 U 0001 CR,LF,"Failure to access code page font file",cr,lf
680 0024 U 0000 CR,LF,"Failure to access device: %1",CR,LF
681 0025 U 0001 CR,LF,"Device or code page missing from font file",CR,LF
682 0026 U 0000 CR,LF,"Font file contents invalid",CR,LF
683 0027 U 0001 CR,LF,"Previously prepared code page replaced",CR,LF
684 0028 U 0001 CR,LF,"Active code page for device %1 is %2",CR,LF
685 0029 U 0000 CR,LF,"Device %1 not prepared",CR,LF
686 0030 U 0001 "%1 code pages:",CR,LF
687 0031 U 0001 " code page %1",CR,LF
688 0032 U 0001 CR,LF,"MODE %1 code page function completed",CR,LF
689 0033 U 0002 CR,LF,"Current code page settings:",CR,LF
690 0034 U 0002 " %1 - %2 code page",CR,LF
691 0035 U 0002 " code page not prepared",CR,LF
692 0036 U 0002 "Code page operation not supported on this device",CR,LF
693 0037 U 0002 "No code page has been selected",cr,lf
694 0038 U 0002 "Device error during %1",CR,LF
695 0039 U 0002 "Code page not prepared",CR,LF
696 0040 U 0002 CR,LF,"Current keyboard does not support this code page",CR,LF
697 0041 U 0002 CR,LF,"Error during read of font file",CR,LF
698 0042 U 0002 CR,LF,"Unable to perform refresh operation",CR,LF
700 0044 U 0002 CR,LF,"Status for device %1:",CR,LF
701 0045 U 0002 "------------------"
702 0046 U 0002 "----",CR,LF
703 0047 U 0002 "-----",CR,LF
704 0048 U 0002 "LINES=%1",CR,LF
705 0049 U 0002 "COLUMNS=%1",CR,LF
706 0050 U 0002 CR,LF,"RATE and DELAY must be specified together",CR,LF
707 0051 U 0002 "RATE=%1",CR,LF
708 0052 U 0002 "DELAY=%1",CR,LF
709 0053 U 0002 CR,LF,"Function not supported on this computer - %1",CR,LF
710 0054 U 0002 CR,LF,"Required font not loaded",CR,LF
711 0055 U 0002 CR,LF,"ANSI.SYS must be installed to perform requested function",CR,LF
712 0056 U 0002 CR,LF,"Baud rate required",CR,LF
713 0057 U 0002 "RETRY=%1",CR,LF
714 0059 U 0002 "rightmost 9",0
715 0060 U 0002 "leftmost 0",0
717 0062 U 0002 "Infinite",0
719 0064 U 0002 "right",0
720 0065 U 0002 "Hardware",0
721 0066 U 0002 "Prepared",0
722 0067 U 0002 "status",0
723 0068 U 0002 "prepare",0
724 0069 U 0002 "select",0
725 0070 U 0002 "refresh",0
726 0071 U 0002 "write of font file to device",0
727 0072 U 0002 "selected",0
728 0073 U 0002 "system",0
730 0002 U 0000 CR,LF,"Source and target drives are the same",CR,LF
731 0003 U 0000 CR,LF,"Invalid number of parameters",CR,LF
732 0006 U 0000 CR,LF,"Invalid drive specification",CR,LF
733 0007 U 0000 CR,LF,"WARNING! No files were found to restore",CR,LF
734 0008 U 0000 CR,LF,"Insert backup diskette %1 in drive %2:",CR,LF
735 0009 U 0000 CR,LF,"Insert restore target in drive %1:",CR,LF
736 0011 U 0000 CR,LF,"WARNING! Diskette is out of sequence",CR,LF
737 "Replace diskette or continue if OK",CR,LF
738 0012 U 0000 CR,LF,"The last file was not restored",CR,LF
739 0013 U 0000 CR,LF,"*** Files were backed up %1 ***",CR,LF
740 0014 U 0000 CR,LF,"Source does not contain backup files",CR,LF
741 0015 U 0000 CR,LF,"Insufficient memory",CR,LF
742 0016 U 0000 CR,LF,"WARNING! File %1",CR,LF
743 "is a read-only file",CR,LF
744 "Replace the file (Y/N)?",CR,LF
745 0017 U 0000 CR,LF,"Restore file sequence error",CR,LF
746 0018 U 0000 CR,LF,"File creation error",CR,LF
747 0019 U 0000 CR,LF,"Insufficient disk space",CR,LF
748 0020 U 0000 CR,LF,"*** Not able to restore file ***",CR,LF
749 0021 U 0000 CR,LF,"*** Restoring files from drive %1: ***",CR,LF
750 0022 U 0000 CR,LF,"WARNING! File %1",CR,LF
751 "was changed after it was backed up",CR,LF
752 "Replace the file (Y/N)?",CR,LF
753 0023 U 0000 "Diskette: %1",CR,LF
756 0004 U 0000 "Invalid SELECT boot media",CR,LF,CR,LF
757 "Insert INSTALL diskette in drive A:, then retry"
758 0005 U 0000 "Invalid disk/diskette media",cr,lf,cr,lf
759 "Insert INSTALL diskette in drive A:, then retry"
760 0006 U 0000 "Invalid parameters on SELECT command line",CR,LF,CR,LF
761 "Make sure the INSTALL diskette is in drive A:,",CR,LF
762 "then press Ctrl+Alt+Del to restart."
763 0007 U 0000 BELL,"Unable to install DOS. Program terminated",CR,LF
764 0008 U 0000 "Loading SELECT. Please wait..."
765 0009 U 0000 "You must restart your computer to continue.",CR,LF,CR,LF
766 "Press Ctrl+Alt+Del to continue with DOS installation."
767 0010 U 0000 "Insert SELECT diskette in drive A:",CR,LF,CR,LF
768 "Press Enter to continue installing DOS,",CR,LF
769 "or press Esc to exit.",CR,LF
771 0012 U 0000 "Insert SELECT diskette in drive A:",CR,LF,CR,LF
772 "Press Enter to continue.",CR,LF
773 0013 U 0001 "Remove the SELECT COPY Diskette from drive A:",CR,LF,CR,LF
774 "Insert the INSTALL Diskette in drive A:",CR,LF,CR,LF,CR,LF
775 "Press Enter to continue.",CR,LF
776 0014 U 0001 "Remove the INSTALL Diskette from drive A:",CR,LF,CR,LF
777 "Insert the SELECT COPY Diskette in drive A:",CR,LF,CR,LF,CR,LF
778 "Press Enter to continue.",CR,LF
779 0015 U 0001 "Copying diskette . . .",CR,LF
780 0016 U 0001 "Drive not ready. Please close the",CR,LF,CR,LF
781 "diskette drive door and press Enter",CR,LF
782 "to continue, or Esc to exit SELECT.",CR,LF
783 0017 U 0001 "Write protect diskette in drive.",CR,LF,CR,LF
784 "Please remove protect tab and",CR,LF
785 "press Enter to continue, or Esc to exit SELECT.",CR,LF
786 0018 U 0001 "An error occurred while installing DOS.",CR,LF
787 "Press Enter to continue, or Esc to exit SELECT.",CR,LF
788 0019 U 0001 "Insert the INSTALL Diskette in drive A:",CR,LF,CR,LF
789 "Press Enter to continue.",CR,LF
791 0002 U 0000 "Directory PATH listing for Volume %1",CR,LF
792 0003 U 0000 "Directory PATH listing",CR,LF
793 0004 U 0000 "No sub-directories exist",CR,LF,LF
796 0003 U 0000 CR,LF,"No files replaced",CR,LF
797 0004 U 0000 CR,LF,"No files added",CR,LF
798 0013 U 0000 CR,LF,"Replacing %1",CR,LF
799 0014 U 0000 CR,LF,"Adding %1",CR,LF
800 0015 U 0000 CR,LF,"%1 file(s) replaced",CR,LF
801 0016 U 0000 CR,LF,"%1 file(s) added",CR,LF
802 0017 U 0000 CR,LF,"No files found - %1",CR,LF
803 0022 U 0000 CR,LF,"Replace %1? (Y/N)"
804 0023 U 0000 CR,LF,"Add %1? (Y/N)"
806 0004 U 0000 "Does %1 specify a file name",CR,LF
807 "or directory name on the target",CR,LF
808 "(F = file, D = directory)?"
809 0005 U 0000 "Press any key to begin copying file(s)"
810 0006 U 0000 "Path too long",CR,LF
811 0008 U 0000 "Cannot perform a cyclic copy",CR,LF
812 0012 U 0000 "Cannot XCOPY from a reserved device",CR,LF
813 0021 U 0000 "Invalid number of parameters",CR,LF
814 0022 U 0000 "Cannot XCOPY to a reserved device",CR,LF
815 0024 U 0000 "File creation error",CR,LF
816 0025 U 0000 "Reading source file(s)...",CR,LF
818 0027 U 0000 "%1 File(s) copied",CR,LF
819 0028 U 0000 "%1 File not found",CR,LF
821 0030 U 0000 "%1%2",CR,LF
822 0031 U 0000 "%1\%2",CR,LF
823 0032 U 0000 "%1",CR,LF
824 0033 U 0000 "%1%2 (Y/N)?"
825 0034 U 0000 "%1\%2 (Y/N)?"
827 0002 U 0000 "Insufficient memory",CR,LF
828 0003 U 0000 "MS-DOS Version 4.00, VDISK virtual disk %1",CR,LF
829 0004 U 0000 " Buffer size adjusted",CR,LF
830 0005 U 0000 " Sector size adjusted",CR,LF
831 0006 U 0000 " Directory entries adjusted",CR,LF
832 0007 U 0000 " Invalid switch character",CR,LF
833 0008 U 0000 " Transfer size adjusted",CR,LF
834 0009 U 0000 " Buffer size: %1 KB",CR,LF
835 0010 U 0000 " Sector size: %1",CR,LF
836 0011 U 0000 " Directory entries: %1",CR,LF
837 0012 U 0000 " Transfer size: %1",CR,LF
838 0013 U 0000 "VDISK not installed - "
839 0014 U 0000 " Extender Card switches",CR,LF
840 "do not match system memory size",CR,LF,CR,LF
842 0002 U 0000 "Active Code Page: %1",CR,LF
843 0003 U 0000 "Previous Code Page: %1",CR,LF
844 0004 U 0000 "None",NULL
845 0005 U 0000 "Non-standard",NULL
846 0006 U 0002 CR,LF,"DOS command line parameters supported",COLON,CR,LF,LF
847 0007 U 0002 " /STA - Request Status only",CR,LF
848 " ? - Display this summary of parameters",CR,LF,CR,LF
849 0008 U 0002 " Code Pages available",COLON,CR,LF
850 " 437 - USA Graphic Character Set",CR,LF
851 0009 U 0002 " 850 - Multi-lingual Graphic Character Set",CR,LF
852 " 860 - Portuguese Graphic Character Set",CR,LF
853 0010 U 0002 " 863 - Canadian French Graphic Character Set",CR,LF
854 " 865 - Nordic Graphic Character Set",CR,LF
856 0004 U 0000 CR,LF,"FASTOPEN installed",CR,LF
857 0005 U 0000 CR,LF,"FASTOPEN already installed",CR,LF
858 0006 U 0000 CR,LF,"Incorrect parameter",CR,LF
859 0007 U 0000 CR,LF,"Too many drive entries",CR,LF
860 0008 U 0000 CR,LF,"Same drive specified more than once",CR,LF
861 0009 U 0000 CR,LF,"Invalid parameter",CR,LF
862 0010 U 0000 CR,LF,"Invalid switch type",CR,LF
863 0011 U 0000 CR,LF,"Invalid extent entry",CR,LF
864 0012 U 0001 CR,LF,"Invalid file/directory entry",CR,LF
865 0013 U 0000 CR,LF,"Cannot setup expanded memory",CR,LF
866 0014 U 0000 CR,LF,"Expanded memory not available",CR,LF
867 0015 U 0000 CR,LF,"Invalid drive specification %1",CR,LF
868 0016 U 0002 CR,LF,"FASTOPEN EMS entry count exceeded. Use fewer entries",CR,LF
869 0017 U 0000 CR,LF,"Cannot use FASTOPEN for drive %1",CR,LF
870 0018 U 0000 CR,LF,"Too many extent entries",CR,LF
871 0019 U 0000 CR,LF,"Too many file/directory entries",CR,LF
873 0001 U 0000 "Incorrect APPEND version",CR,LF
874 0002 U 0000 "Invalid path",CR,LF
875 0003 U 0000 "Invalid parameter",CR,LF
876 0004 U 0000 "Invalid combination of parameters",CR,LF
877 0005 U 0000 "No Append",CR,LF
878 0006 U 0000 "APPEND / ASSIGN Conflict",CR,LF
879 0007 U 0000 "APPEND / TopView Conflict",CR,LF
880 0008 U 0000 "Incorrect DOS version",CR,LF
881 0009 U 0000 "APPEND already installed",CR,LF
883 0005 U 0000 "Invalid parameter: %1",CR,LF
884 0007 U 0000 "Duplicate parameters not allowed",CR,LF
885 0009 U 0000 "Cannot find GRAPHICS profile",CR,LF
886 0010 U 0000 "Required profile statement missing before line %1",CR,LF
887 0011 U 0000 "Invalid profile statement on line %1",CR,LF
888 0012 U 0000 "Profile statement out of sequence on line %1",CR,LF
889 0013 U 0000 "Error reading GRAPHICS profile",CR,LF
890 0014 U 0000 "Syntax errors in GRAPHICS profile",CR,LF
891 0015 U 0000 "Printbox ID not in GRAPHICS profile",CR,LF
892 0016 U 0000 "Printer type not in GRAPHICS profile",CR,LF
893 0017 U 0000 "/B invalid with a black and white printer",CR,LF
894 0018 U 0000 "Unable to reload with profile supplied",CR,LF
896 0002 U 0000 "%1 code page driver cannot be initialized",CR,LF,BELL
897 0008 U 0000 "Insufficient memory",CR,LF,BELL
898 0012 U 0000 "Invalid syntax on DISPLAY.SYS code page driver",CR,LF,BELL
900 0002 U 0000 "%1 code page driver cannot be initialized",CR,LF,BELL
901 0012 U 0000 "Invalid syntax on PRINTER.SYS code page driver",CR,LF,BELL
903 0002 U 0000 "Current keyboard code: %1"
904 0003 U 0000 "Current keyboard ID: %1"
905 0004 U 0000 " code page: %1",CR,LF
906 0005 U 0000 "Current CON code page: %1",CR,LF
907 0006 U 0000 "Invalid keyboard code specified",CR,LF
908 0007 U 0000 "Invalid keyboard ID specified",CR,LF
909 0008 U 0000 "Invalid code page specified",CR,LF
910 0009 U 0000 "Bad or missing Keyboard Definition File",CR,LF
911 0010 U 0000 "KEYB has not been installed",CR,LF
912 0011 U 0000 "Active code page not available from CON device",CR,LF
913 0012 U 0000 "Code page specified has not been prepared",CR,LF
914 0013 U 0000 "One or more CON code pages invalid for given keyboard code",CR,LF
915 0014 U 0000 "Code page requested (%1) is not valid for given keyboard code",CR,LF
916 0015 U 0000 "Code page specified is inconsistent with the selected code page",CR,LF
917 0016 U 0001 "Keyboard ID specified is inconsistent with the selected keyboard layout",CR,LF
918 0017 U 0000 "Unable to create KEYB table in resident memory",CR,LF
922 0011 U 0000 " Address Name Size Type ",CR,LF
923 0012 U 0000 " ÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄ ÄÄÄÄÄÄ",CR,LF
924 0013 U 0000 " Handle EMS Name Size ",CR,LF
925 0014 U 0000 " ÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄ ",CR,LF
926 0015 U 0000 " %1 %2 %3 %4",CR,LF
927 0016 U 0000 " %1 %2 %3 ",CR,LF
928 0017 U 0000 " %1 %2 ",CR,LF
929 0018 U 0000 "%1 bytes total memory",CR,LF
930 0019 U 0000 "%1 bytes available",CR,LF
931 0020 U 0000 "%1 largest executable program size",CR,LF
932 0021 U 0000 "%1 bytes total EMS memory",CR,LF
933 0022 U 0000 "%1 bytes free EMS memory",CR,LF
934 0023 U 0000 "%1 bytes total extended memory",CR,LF
935 0024 U 0000 "Interrupt Vector",0
936 0025 U 0000 "ROM Communication Area",0
937 0026 U 0000 "DOS Communication Area",0
939 0028 U 0000 "MSDOS",0
940 0029 U 0000 "System Data",0
941 0030 U 0000 "System Program",0
942 0031 U 0000 "System Device Driver",0
943 0032 U 0000 "Installed Device Driver",0
945 0034 U 0000 "%1: - %2:",0
946 0035 U 0000 "BUFFERS=",0
947 0036 U 0000 "FILES=",0
948 0037 U 0000 "FCBS=",0
949 0038 U 0000 "STACKS=",0
950 0039 U 0000 "DEVICE=",0
952 0041 U 0000 "LASTDRIVE=",0
953 0042 U 0000 "----------",0
955 0044 U 0000 " %1 %2 %3",CR,LF
956 0045 U 0001 "INSTALL=",0
957 0046 U 0001 "%1 bytes available extended memory",CR,LF
958 0047 U 0000 "System Stacks",0
959 0048 U 0000 "-- Free --",0
960 0049 U 0000 "Program",0
961 0050 U 0000 "Environment",0
964 0004 U 0000 "Network has not been started",CR,LF
965 0050 U 0000 "NET809: Network request not supported",CR,LF,0
966 0051 U 0000 "NET801: Remote computer not listening",CR,LF,0
967 0052 U 0000 "NET802: Duplicate name on network",CR,LF,0
968 0053 U 0000 "NET803: Network path not found",CR,LF,0
969 0054 U 0000 "NET804: Network busy",CR,LF,0
970 0055 U 0000 "NET805: Network device no longer exists",CR,LF,0
971 0056 U 0000 "NET806: NETBIOS command limit exceeded",CR,LF,0
972 0057 U 0000 "NET807: System error; NETBIOS error",CR,LF,0
973 0058 U 0000 "NET808: Incorrect response from network",CR,LF,0
974 0059 U 0000 "NET810: Unexpected network error",CR,LF,0
975 0060 U 0000 "NET811: Incompatible remote adapter",CR,LF,0
976 0061 U 0000 "NET812: Print queue full",CR,LF,0
977 0062 U 0000 "NET813: Not enough space for print file",CR,LF,0
978 0063 U 0000 "NET814: Print file was cancelled",CR,LF,0
979 0064 U 0000 "NET815: Network name was deleted",CR,LF,0
980 0065 U 0000 "Access denied",CR,LF,0
981 0066 U 0000 "NET817: Network device type incorrect",CR,LF,0
982 0067 U 0000 "NET818: Network name not found",CR,LF,0
983 0068 U 0004 "NET819: Network name limit exceeded",CR,LF,0
984 0069 U 0000 "NET820: NETBIOS session limit exceeded",CR,LF,0
985 0070 U 0000 "NET821: Sharing temporarily paused",CR,LF,0
986 0071 U 0000 "NET823: Network request not accepted",CR,LF,0
987 0072 U 0000 "NET822: Print or disk redirection is paused",CR,LF,0
988 0073 U 0000 "NET476: Netbeui not loaded",CR,LF,0
989 0074 U 0000 "NET477: Unexpected adapter close",CR,LF,0
990 0084 U 0004 "NET819: Network name limit exceeded",CR,LF,0
991 0085 U 0004 "NET802: Duplicate name on network",CR,LF,0
992 0088 U 0000 "NET825: Network data fault",CR,LF,0
994 0001 U 0000 CR,LF,"$"
995 0002 U 0000 "XMA2EMS: Expanded Memory Manager",CR,LF
996 "(c)Copyright Microsoft Corporation 1988 All rights reserved",CR,LF,"$"
997 0003 U 0000 CR,LF,"Performing XMA diagnostics: ","$"
998 0004 U 0000 CR,LF,"Diagnostics completed ",CR,LF,LF,"$"
999 0005 U 0000 "Page Frame starts at........................ "
1000 0006 U 0000 "XXXX:0",CR,LF,"Pages mapped to conventional memory......... "
1001 0007 U 0000 "0 ",CR,LF,"$"
1002 0008 U 0000 "Pages reserved for 3270 PC Control Program.. "
1003 0009 U 0000 "0 ",CR,LF,"$"
1004 0010 U 0000 "Pages available for expanded memory......... "
1005 0011 U 0000 "0 ",CR,LF,"$"
1006 0012 U 0000 CR,LF,"Adapter error ",CR,LF,"$"
1007 0013 U 0000 CR,LF,"Cannot find adapter ",CR,LF,"$"
1008 0014 U 0000 CR,LF,"Parameter syntax or value error ",CR,LF,"$"
1009 0015 U 0000 CR,LF,"Cannot find XMA Emulator device driver ",CR,LF,"$"
1010 0016 U 0000 CR,LF,"Incorrect version of XMAEM.SYS ",CR,LF,"$"
1011 0017 U 0000 CR,LF,"Incorrect version of INDXMAA.SYS ",CR,LF,"$"
1012 0018 U 0000 CR,LF,"Too many EMS pages requested in /X parameter ",CR,LF,"$"
1013 0019 U 0000 "Expanded Memory Manager has NOT been installed",CR,LF,"$"
1014 0020 U 0000 "Specified page address conflicts with installed adapter at address "
1015 0021 U 0000 "0 ",CR,LF,"$"
1016 0022 U 0000 "Possible 16KB page available at address "
1017 0023 U 0000 "0 ",CR,LF,"$"
1018 0024 U 0000 CR,LF,"Possible 64KB frame available at address "
1019 0025 U 0000 "0 ",CR,LF,"$"
1020 0026 U 0000 "No page addresses specified",CR,LF,"$"
1022 0028 U 0000 " "," KB OK","$"
1023 0029 U 0000 " ",CR,LF,"$"
1026 0010 U 0003 " PAUSED %1 %2 %3",CR,LF
1027 0011 U 0001 " %1 %2 %3",CR,LF
1028 0012 U 0001 " Local IFS",CR,LF
1029 0013 U 0001 " Status Device Name Parameters",CR,LF
1030 0014 U 0001 " ______ ______ _________ ___________________",CR,LF,CR,LF
1031 0015 U 0003 "No entries found",CR,LF
1032 0016 U 0003 " ERROR %1 %2 %3",CR,LF
1034 0004 U 0000 "Cannot FDISK with network loaded",CR,LF
1035 0005 U 0000 "No fixed disks present",CR,LF
1036 0006 U 0000 "Error reading fixed disk",CR,LF
1037 0007 U 0000 "Error writing fixed disk",CR,LF
1040 1001 U 0000 "MS-DOS Version 4.00"
1041 1002 U 0000 "Fixed Disk Setup Program"
1042 1003 U 0000 "(C)Copyright Microsoft Corp. 1983, 1988"
1043 1004 U 0000 "FDISK Options"
1044 1005 U 0000 "1. <R>Create DOS Partition or Logical DOS Drive"
1045 1006 U 0000 "2. <R>Set active partition"
1046 1007 U 0000 "3. <R>Delete DOS Partition or Logical DOS Drive"
1047 1008 U 0000 "4. <R>Display partition information"
1048 1009 U 0000 "Press <H>Esc<R> to exit FDISK"
1049 1010 U 0000 "Choose one of the following:"
1050 1011 U 0000 "5. <R>Select next fixed disk drive"
1051 1012 U 0000 "Current fixed disk drive: <H><I>"
1052 1013 U 0000 "WARNING! <R>No partitions are set active - disk 1 is not startable unless"
1053 1014 U 0000 "a partition is set active"
1054 1015 U 0000 "Enter choice: [<S> ]"
1055 1016 U 0000 "Create DOS Partition or Logical DOS Drive"
1056 1017 U 0000 "1. <R>Create Primary DOS Partition"
1057 1018 U 0000 "2. <R>Create Extended DOS Partition"
1058 1019 U 0000 "3. <R>Create Logical DOS Drive(s) in the Extended DOS Partition"
1059 1020 U 0000 "Press <H>Esc<R> to return to FDISK Options"
1060 1021 U 0000 "Create Primary DOS Partition"
1061 1022 U 0000 "Do you wish to use the maximum available size for a Primary DOS Partition"
1062 1023 U 0000 "and make the partition active (<Y>/<N>).....................? <H>[<S> ]"
1063 1024 U 0000 "(<Y>/<N>)...................................................? <H>[<S> ]"
1064 1025 U 0000 "Partition Status Type Size in Mbytes Percentage of Disk Used"
1065 1026 U 0000 "Total disk space is <HIIIIR> Mbytes (1 Mbyte = 1048576 bytes)"
1066 1027 U 0000 "Maximum space available for partition is <HIIIIR> Mbytes (<HIIIIR>)"
1067 1028 U 0000 "Enter partition size in Mbytes or percent of disk space (%) to"
1068 1029 U 0000 "create a Primary DOS Partition.................................: <H>[<IIISI>]"
1069 1030 U 0000 "Create Extended DOS Partition"
1070 1031 U 0000 "create an Extended DOS Partition..............................: <H>[<IIISI>]"
1071 1032 U 0000 "Press <H>Esc<R> to continue"
1072 1033 U 0000 "Create Logical DOS Drive(s) in the Extended DOS Partition"
1073 1034 U 0000 "Drv Volume Label Mbytes System Usage"
1074 1035 U 0000 "Total Extended DOS Partition size is <HIIIIR> Mbytes (1 MByte = 1048576 bytes)"
1075 1036 U 0000 "Maximum space available for logical drive is <HIIIIR> Mbytes <H>(<IIII>)"
1076 1037 U 0000 "Enter logical drive size in Mbytes or percent of disk space (%)...<H>[<IIISI>]"
1077 1038 U 0000 "Set Active Partition"
1078 1039 U 0000 "Enter the number of the partition you want to make active...........: <H>[<S> ]"
1079 1040 U 0000 "Delete DOS Partition or Logical DOS Drive"
1080 1041 U 0000 "1. <R>Delete Primary DOS Partition"
1081 1042 U 0000 "2. <R>Delete Extended DOS Partition"
1082 1043 U 0000 "3. <R>Delete Logical DOS Drive(s) in the Extended DOS Partition"
1083 1044 U 0000 "Delete Primary DOS Partition"
1084 1045 U 0000 "WARNING! <OR>Data in the deleted Primary DOS Partition will be lost."
1085 1046 U 0000 "Do you wish to continue (<Y>/<N>).................? <H>[<S> ]"
1086 1047 U 0000 "Delete Extended DOS Partition"
1087 1048 U 0000 "WARNING! <OR>Data in the deleted Extended DOS Partition will be lost."
1088 1049 U 0000 "Do you wish to continue (<Y>/<N>).................? <H>[<S> ]"
1089 1050 U 0000 "Delete Logical DOS Drive(s) in the Extended DOS Partition"
1090 1051 U 0000 "WARNING! <OR>Data in a deleted Logical DOS Drive will be lost."
1091 1052 U 0000 "What drive do you want to delete...............................? <H>[<S> ]"
1092 1053 U 0000 "Are you sure (<Y>/<N>)..............................? <H>[<S> ]"
1093 1054 U 0000 "Enter Volume Label..............................? <H>[<S> ]"
1094 1055 U 0000 "Display Partition Information"
1095 1056 U 0000 "The Extended DOS Partition contains Logical DOS Drives."
1096 1057 U 0000 "Do you want to display the logical drive information (<Y>/<N>)......?<H>[<S> ]"
1097 1058 U 0000 "Display Logical DOS Drive Information"
1098 1059 U 0000 "System will now restart"
1099 1060 U 0001 "Insert DOS Install diskette in drive A:"
1100 1061 U 0000 "Press any key when ready . . .<S>"
1101 1062 U 0000 "Primary DOS Partition deleted"
1102 1063 U 0000 "Extended DOS Partition deleted"
1103 1064 U 0000 "Drive deleted"
1104 1065 U 0000 "Partition <I> made active"
1105 1066 U 0000 "Primary DOS Partition created"
1106 1067 U 0000 "Extended DOS Partition created"
1107 1068 U 0000 "Logical DOS Drive created, drive letters changed or added<W>"
1108 1069 U 0000 "No partitions defined"
1109 1070 U 0000 "No logical drives defined"
1110 1071 U 0000 "Drive letters have been changed or deleted<W>"
1111 1072 U 0000 "Drive redirected"
1112 1073 U 0000 "Primary DOS Partition created, drive letters changed or added"
1113 1074 U 0000 "No fixed disks present."
1114 1075 U 0000 "Error reading fixed disk."
1115 1076 U 0000 "Error writing fixed disk."
1116 1077 U 0000 "Incorrect DOS version."
1117 1078 U 0000 "Cannot FDISK with network loaded."
1118 1079 U 0000 "No Primary DOS Partition to delete."
1119 1080 U 0000 "No Extended DOS Partition to delete."
1120 1081 U 0000 "Primary DOS Partition already exists."
1121 1082 U 0000 "Extended DOS Partition already exists."
1122 1083 U 0000 "No space to create a DOS partition."
1123 1084 U 0000 "Requested logical drive size exceeds the maximum available space.<W>"
1124 1085 U 0000 "Requested partition size exceeds the maximum available space.<W>"
1125 1086 U 0000 "No partitions to delete."
1126 1087 U 0000 "The only startable partition on Drive 1 is already set active.<W>"
1127 1088 U 0000 "No partitions to make active."
1128 1089 U 0000 "Partition selected (<I>) is not startable, active partition not changed.<W>"
1129 1090 U 0000 "Cannot create Extended DOS Partition without"
1130 1091 U 0000 "Primary DOS Partition on disk 1.<W>"
1131 1092 U 0000 "All available space in the Extended DOS Partition"
1132 1093 U 0000 "is assigned to logical drives.<W>"
1133 1094 U 0000 "Cannot delete Extended DOS Partition while logical drives exist.<W>"
1134 1095 U 0000 "All logical drives deleted in the Extended DOS Partition.<W>"
1135 1096 U 0000 " is not a choice. Please enter <III>.<W>"
1136 1097 U 0000 "WARNING! The partition set active is not startable.<W>"
1137 1098 U 0000 " Only non-startable partitions exist."
1138 1099 U 0000 "Only partitions on Drive 1 can be made active.<W>"
1139 1100 U 0000 "Maximum number of Logical DOS Drives installed.<W>"
1140 1101 U 0000 "Cannot create a zero size partition."
1141 1102 U 0000 "Drive <II> already deleted."
1142 1103 U 0000 "Unable to access Drive <I>.<OW>"
1143 1104 U 0000 "Invalid entry, please enter <III>.<W>"
1144 1105 U 0000 "Cannot delete Primary DOS Partition on drive 1 "
1145 1106 U 0000 "when an Extended DOS Partition exists.<W>"
1146 1107 U 0000 "Invalid entry, please press Enter.<W>"
1147 1108 U 0000 "Volume label does not match.<W>"
1148 1109 U 0000 "Cannot create Logical DOS Drive without"
1149 1110 U 0000 "an Extended DOS Partition on the current drive.<W>"
1150 1111 U 0000 "No Logical DOS Drive(s) to delete."
1151 1112 U 0000 "Message string error <I>. See header of FDISKC.MSG for error definition"
1152 1113 U 0000 "Internal error"
1153 1114 U 0001 "Invalid partition table",0
1154 1115 U 0001 "Error loading operating system",0
1155 1116 U 0001 "Missing operating system",0
1157 0001 U 0000 "80386 XMA Emulator Version 1.10",CR,LF
1158 " (C) Copyright IBM Corporation 1987, 1988 All rights reserved",CR,LF,CR,LF,"$"
1159 0002 U 0000 "80386 XMA Emulator installed",CR,LF,"$"
1160 0003 U 0004 "80386 XMA Emulator not installed. This system unit",CR,LF
1161 " is not supported.",CR,LF,CR,LF,"$"
1162 0004 U 0000 "80386 XMA Emulator not installed.",CR,LF
1163 " Protected mode already in use.",CR,LF,CR,LF,"$"
1164 0005 U 0003 "80386 XMA Emulator not installed",CR,LF
1165 " Parameter value must specify 64 pages or greater",CR,LF,"$"
1166 0006 U 0000 "80386 XMA Emulator not installed",CR,LF
1167 " Insufficient memory for requested parameter value",CR,LF,"$"
1169 0100 U 0000 CR,LF,"- Enter your keyboard code: "
1170 0110 U 0000 "US" ;DEFAULT KEYBOARD CODE
1171 0120 U 0000 CR,LF,"- Enter the drive which contains files to be",CR,LF
1172 " replaced (target cannot be drive A): "
1173 0130 U 0000 "C" ;DEFAULT DRIVE LETTER
1174 0140 U 0000 CR,LF,"- Do you want to replace the DOS files",CR,LF
1175 " in all directories (Y/N)?"
1176 0150 U 0000 "Y" ;DEFAULT Y/N PROMPT
1177 0160 U 0000 CR,LF,"- Enter the target directory name (\ for root): "
1178 0170 U 0000 "\" ;DEFAULT PATH
1179 0180 U 0000 CR,LF,"- Do you start TUGBOAT from drive C (Y/N)? "
1180 0190 U 0000 CR,LF,"- Insert next Corrective Service Diskette in drive A",CR,LF
1181 0200 U 0000 CR,LF,"- Insert Corrective Service Diskette in drive A",CR,LF
1182 " Press any key to restart system . . ."
1183 0210 U 0000 CR,LF,"- Corrective Service has been successfully instatlled",CR,LF
1184 " Prepare system to be restarted",CR,LF
1185 " Press any key to restart system . . ."
1186 0220 U 0000 CR,LF,"Invalid keyboard code specified",CR,LF
projects / MS-DOS.git / blob